Burner Head, Burner Base, Control Panel | Viking F20642 EN, DCCG130

Cleaning and Maintenance

Burner Head

If ports on burner head are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports. When replacing burner head, carefully align the 2 tabs underneath the burner head with the outside edge of burner base. Make sure the tabs are not aligned with the igniter and the burner cap is level.

Note: For stubborn stains, use a non abrasive cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad.

Cleaning Tip: For difficult to clean burner caps and heads, place parts in a zip seal bag with ammonia.

Burner Base

The base should be wiped regularly with hot soapy water at the end of each cooling period. DO NOT use steel wool, abrasive cloths, cleanser, or powders. To remove encrusted materials, soak the area with a hot towel to loosen the material, then use a wooden nylon spatula.

DO NOT use a metal knife, spatula, or any other metal tool to scrape the aluminum base.

•Wipe up any spills which remain on the sealed top surface.

•Replace burner cap, burner head, and grates after drying thoroughly.

Control Panel

DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the control panel. Use hot, soapy water and a soft clean cloth.

Oven Surfaces

Several different finishes have been used in your oven.

NEVER USE AMMONIA, STEEL WOOL PADS OR ABRASIVE CLOTHS, CLEANSERS, OVEN CLEANERS, OR ABRASIVE POWDERS. THEY CAN PERMANENTLY DAMAGE YOUR OVEN.

Product Care

Cleaning and Maintenance

Control Knobs

MAKE SURE ALL THE CONTROL KNOBS POINT TO THE OFF POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in detergent and warm water. Dry completely and replace by pushing firmly onto stem. DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the knob.

Stainless Steel Parts

All stainless steel body parts should be wiped regularly with hot soapy water at the end of each cooling period and with a liquid cleaner designed for that material when soapy water will not do the job. DO NOT use steel wool, abrasive cloths, cleansers, or powders. If necessary, scrape stainless steel to remove encrusted materials, soak the area with hot towels to loosen the material, then use a wooden or nylon spatula or scraper. DO NOT use a metal knife, spatula, or any other metal tool to scrape stainless steel. DO NOT permit citrus or tomato juice to remain on stainless steel surface, as citric acid will permanently discolor stainless steel. Wipe up any spills immediately.

Glass Surfaces

Clean with detergent and warm water. Glass cleaner can be used to remove fingerprints. If using glass cleaner ammonia, make sure that it does not run down on exterior door surface.

Broiler Pan and Grid

Clean with detergent and hot water. For stubborn spots, use a soap- filled steel wool pad.

Oven Racks

Clean with detergent and hot water. Stubborn spots can be scoured with a soap-filled steel wool pad.

WARNING

BURN OR ELECTRICAL SHOCK HAZARD Make sure all controls are OFF and oven is COOL before cleaning. Failure to do so can result in burns

or electrical shock.

Product Care

062509J, DCCG130, DCCG13014BIB, DCCG1304BIB, F20642 EN specifications

The Viking DCCG1304BSS, F20642 EN, DCCG1304BIB, DCCG13014BIB, and DCCG130 are innovative models that have made a significant mark in the domain of gas cooktops. These products represent the pinnacle of advanced kitchen technology, combining functionality with stylish design for a diverse range of culinary needs.

One of the standout features of the Viking DCCG130 series is its robust construction, made from high-grade stainless steel that not only offers durability but also enhances aesthetics, fitting seamlessly into both traditional and contemporary kitchens. The sleek, modern design is both appealing and practical, making it easy to clean and maintain.

Equipped with powerful burners, the Viking cooktops provide exceptional heat output across multiple burners, allowing home chefs to create gourmet meals with ease. The cooktops feature multi-channel flame ports, ensuring even and precise heat distribution. This capability makes it suitable for a variety of cooking techniques, from simmering to sautéing and full-volume boiling.

The DCCG1304BSS and DCCG1304BIB models come with a variety of burner configurations that cater to different cooking styles and preferences. These models also include sealed burners that help prevent spills and make cleaning a breeze. The high-efficiency burners are designed to provide quick ignition and precise temperature control, enhancing the cooking experience.

In terms of technology, these Viking cooktops feature integrated safety measures, including flame failure safety devices. This technology automatically shuts off the gas supply if the flame goes out, ensuring the safety of users in the kitchen. The easy-to-operate knobs allow for smooth adjustments, giving chefs full control over their cooking performance.

Moreover, the Viking DCCG130 series is designed for flexible installation, making it adaptable for various kitchen layouts. Its compatibility with Viking’s other kitchen appliances allows homeowners to create cohesive and streamlined kitchen aesthetics.

Overall, the Viking DCCG1304BSS, F20642 EN, DCCG1304BIB, DCCG13014BIB, and DCCG130 cooktops showcase the brand’s commitment to quality, performance, and user convenience. With their high durability, powerful cooking capabilities, safety features, and elegant design, these cooktops are an excellent choice for culinary enthusiasts eager to elevate their kitchen experience. Whether for everyday use or gourmet cooking, these Viking models are built to impress.