Viking DMOC205SS Touch Control Panel Assembly, Description of LSI, Thermistor, LSIIXA103DR

Page 25

DMOC205SS

VMOC205SS

TOUCH CONTROL PANEL ASSEMBLY

OUTLINE OF TOUCH CONTROL PANEL

The touch control section consists of the following units as shown in the touch control panel circuit.

(1)Key Unit

(2)Control Unit

The principal functions of these units and the signals communicated among them are explained below.

Key Unit

The key unit is composed of a matrix, signals P10 - P17 generated in the LSI are sent to the key unit.

When a key pad is touched, a signal is completed through the key unit and passed back to the LSI through R24 - R27 to perform the function that was requested.

Control Unit

Control unit consists of LSI, power source circuit, synchro- nizing signal circuit, ACL circuit, buzzer circuit, temperature measurement circuit, absolute humidity sensor circuit and indicator circuit.

1)LSI

This LSI controls the temperature measurement signal, AH sensor signal, key strobe signal, relay driving signal for oven function and indicator signal.

2)Power Source Circuit

This circuit generates the voltages necessary for the control unit from the AC line voltage.

3)Synchronizing Signal Circuit

The power source synchronizing signal is available in order to compose a basic standard time in the clock circuit. It incorporates a very small error because it works on commercial frequency.

4)ACL Circuit

A circuit to generate a signals which resetting the LSI to the initial state when power is applied.

5)Buzzer Circuit

The buzzer is responds to signals from the LSI to emit noticing sounds (key touch sound and completion sound).

6)Temperature Measurement Circuit : (OVEN

THERMISTOR)

The temperature in the oven cavity is sensed by the thermistor. The variation of resistance according to sensed temperature is detected by the temperature measurement circuit and the result applied to LSI. The LSI uses this information to control the relay and display units.

7)Absolute Humidity Sensor Circuit

This circuit detects the humidity of a food which is being cooked, to control its automatic cooking.

8)Door Sensing Switch

A switch to inform the LSI if the door is open or closed.

9)Relay Circuit

To drive the magnetron, heating element, fan motor, convection motor, damper motor, turntable motor and light the oven lamp.

10) Indicator Circuit

Indicator element is a Fluorescent Display.

Basically, a Fluorescent Display is triode having a cathode, a grid and an anode. Usually, the cathode of a Fluorescent Display is directly heated and the filament serves as cathode.

The Fluorescent Display has 8-digits, 16-segments are used for displaying figures.

DESCRIPTION OF LSI

LSI(IXA103DR):

The I/O signals of the LSI(IXA103DR) are detailed in the following table.

Pin No.

Signal

I/O

Description

1

VCC

IN

Connected to GND.

2

VEE

IN

Anode (segment) of Fluorescent Display light-up voltage: -30V.

 

 

 

Vp voltage of power source circuit input.

3

AVSS

IN

Power source voltage: -5V.

 

 

 

VC voltage of power source circuit input.

4

VREF

IN

Reference voltage input terminal.

 

 

 

A reference voltage applied to the A/D converter in the LSI. Connected to GND.(0V)

 

 

 

 

23

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Models DMOC205SS VMOC205SS Table of ContentsBefore Servicing DMOC205SS VMOC205SS Before Servicing When the testing is completedLeakage test with enclosure installed Microwave Measurement Procedure CanadaRequirements Leakage test without enclosureLeakage test Microwave Measurement Procedure USAViking Range Corporation If provided, Vent Hood, Fan assembly, Cooling Fan MotorMicrowave Ovens DMOC205SS VMOC205SS Foreword Description SpecificationHigh MIX. Roast VMOC205SS Oven DiagramOperation Power Level P-0 to P-90 CookingDescription of Operating Sequence OFF ConditionAutomatic MIX Cooking Condition Convection Cooking ConditionSensor Cooking Condition Preheating ConditionCompu Defrost Cooking Fire Sensing Feature Microwave ModeCompu BROIL/ Compu ROAST/ Compu Bake Cooking SequenceFigure O-1. Oven Schematic-OFF Condition Schematic DiagramFigure O-3. Oven Schematic-Automatic Mix Cooking Condition Description and Function of Components Damper OPEN-CLOSE Mechanism Troubleshooting GuideMicrowave Cooking Damper OperationProblem Test ProcedureHigh Voltage Rectifier Test Power Transformer TestHigh Voltage Capacitor Test Primary Interlock Switch and Third Door Switch Test Test Procedures Letter Component TestMonitor Switch Secondary Interlock System TestChecking Temperature in the Convection Mode Damper Switch TestHeating Element Test Thermistor TestNoise Filter Test Touch Control Panel Assembly TestWeight 1ST Stage 2ND Stage 3RD Stage 4TH Stage Level Time Test Procedures Letter Component Test KEY Unit TestRelay Test Compu Defrost TestAH Sensor Test Steps Occurrence Cause or CorrectionChecking the initial sensor cooking condition Water load cooking testChecking Control Unit Testing Method for AH Sensor AND/OR Control UnitDescription of LSI Touch Control Panel AssemblyThermistor LSIIXA103DRDigit selection signal Temperature measurement input Oven ThermistorConvection motor driving signal Cooling fan motor driving signalTOR Segment data signal Segment data signalsKey strobe signal Structure of Absolute Humidity Sensor Absolute Humidity Sensor CircuitServicing Power Transformer Removal Component Replacement and Adjustment ProcedureOuter Case Removal Magnetron RemovalPositive Lock Connector NO-CASE Type Removal High Voltage Rectifier Assembly RemovalDamper Assembly Removal High Voltage Capacitor RemovalFAN Motor Removal Oven Lamp and Lamp Socket RemovalThermistor Removal Heating Element RemovalControl Panel Assembly and Control Unit Removal Power Supply Cord ReplacementControl Unit and KEY Unit Adjustment Door Replacement and AdjustmentAfter adjustment, check the following RemovalDoor Adjustment Door DisassemblyAfter adjustment, make sure of the following Preparation For Testing Microwave Measurement ProcedureLeakage test Leakage Test with Enclosure Installed RequirementFigure S-1. Pictorial Diagram SFigureControl Panel DIP Electrical Parts Parts ListCabinet Parts Control Panel PartsMiscellaneous Door PartsScrews Nuts and Washers LX-NZ0029YBE0 Oven and Cabinet Parts Control Panel Parts Door Parts Packing and Accessories DMOC205SS VMOC205SS Copyright 2004 by Viking

VMOC205SS, DMOC205SS specifications

The Viking DMOC205SS and VMOC205SS are two state-of-the-art microwave ovens that redefine cooking convenience and efficiency. Designed for modern kitchens, these appliances come equipped with a range of features and technologies that enhance their usability and performance.

One of the most notable aspects of the Viking DMOC205SS and VMOC205SS is their powerful cooking capabilities. Both models utilize an advanced cooking system that ensures even heat distribution, resulting in perfectly cooked meals every time. With a robust wattage of up to 1,200 watts, these microwaves can quickly and efficiently prepare a wide variety of dishes.

The DMOC205SS features a spacious interior, offering 2.1 cubic feet of cooking space, making it ideal for larger families or those who frequently entertain guests. The VMOC205SS variant also shares a similar capacity but comes with additional features tailored for versatility. The interior design of both models includes a stainless steel finish that not only enhances durability but also adds a touch of elegance to any kitchen.

Functionality is at the forefront of the Viking DMOC205SS and VMOC205SS. Both models are equipped with multiple cooking modes, including microwave, convection, and grilling options. This multi-functional capability allows users to seamlessly switch between cooking methods, ensuring optimal results for various recipes. The intuitive control panel features easy-to-read buttons and a digital display, making it user-friendly for all cooking levels.

In terms of technology, these Viking microwaves incorporate sensor cooking, which automatically detects the moisture and temperature of food, adjusting cooking times accordingly. This feature not only prevents overcooking but also ensures consistently delicious results. The models also come with pre-programmed cooking settings for popular dishes, making meal preparation simpler and quicker.

Energy efficiency is another critical aspect of the Viking DMOC205SS and VMOC205SS. Both models are designed to minimize energy consumption while maximizing performance, which is beneficial for both the environment and the homeowner’s energy bills.

Safety features are embedded within the design of these microwaves. They include a child lock function to prevent accidental use, as well as a timer that ensures food is cooked for the precise amount of time needed.

In summary, the Viking DMOC205SS and VMOC205SS are exceptional microwave ovens that combine advanced technology, practical features, and stylish design. Their powerful cooking capabilities, user-friendly controls, and energy-efficient operation make them a perfect addition to any modern kitchen. These appliances empower users to explore a wide range of cooking possibilities, bringing convenience and quality to meal preparation.
Top Page Image Contents