Unpacking Instructions

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

NOTICE

This appliance is of the grounded type. If you use an extension cord, it should be a grounded type 3-wire cord. If the plug does not fit, contact a qualified electrician. Do not modify the plug in any way.

This appliance comes with a resettable thermal fuse to prevent damage to the motor in case of extreme overload. Should the unit shut off unexpectedly, unplug it and let it cool for at least 15 minutes before continuing (see “To reset the unit” #5 on page 6).

Maximum of 600 watts rated power is based on Cuisinart AFP-7 food processor attachment. Other attachments may draw significantly less power.

SPECIAL CORD SET INSTRUCTIONS

NOTICE

For your protection, this unit is equipped with a 3-conductor cord set that has a molded

3-prong grounding-type plug, and should be used in combination with a properly connected grounding-type outlet as shown in Figure A.

NOTE: Do not remove the grounding prong.

CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded.

Note: Use of an adapter is not permitted in Canada.

1.Place the gift box containing your Cuisinart® SmartPower Duet® Deluxe 600-Watt Blender/Food Processor on a flat, sturdy surface before unpacking.

2.Remove instruction booklet and other printed materials from top of corrugated insert.

3.Next, remove the top corrugated insert. It contains the adapter stem , the slicing/shredding disc and the pour lid. Carefully remove slicing/shredding disc, as it is very sharp, then remove pour lid and adapter stem.

4.Carefully lift blender base from box and set aside.

5.Remove the middle corrugated insert.

6.Remove the lower corrugated insert containing the blender jar assembly. Be careful not to tip the jar when removing.”

7.Remove food processor accessory and any additional literature from the box.

To assemble the blender, follow the Assembly instructions on page 5 of this instruction booklet. To assemble the food processor, follow the Assembly instructions on page 9. Replace all corrugated inserts in the box and save the box for repackaging. See the Features and Benefits section on page 4 for a listing of all blender parts. See the Features section on page 8 for a listing of all food processor parts.

Before using for the first time: Wash all parts according to the Cleaning and Maintenance sections on pages 7 and 11 of this booklet to remove any dust or residue.