Viking F20875 EN manual Adjustable Humidity Zone and Adjustable Cold Zone

Adjustable Humidity Zone and Adjustable Cold Zone

Adjustable Humidity Zone™

You can control the amount of humidity in the Adjustable Humidity Zone drawer. Adjust the control to any setting between LOW and HIGH. LOW (open) for best storage of fruits and vegetables with skins. HIGH (closed) for best storage of fresh, leafy vegetables.

Adjustable Cold Zone™

The refrigerator drawer holds more fresh food in more ways than ever before, and is ideal for storing popular food items that need to be readily accessible. In addition the drawer’s location allows children to serve themselves from the refrigerator.

Use the full-width drawer to store large party platters or deli trays, or use a drawer organizer to store smaller items such as yogurt, juice boxes and lunch meat within easy access.

To Adjust the Temperature Control:

The refrigerated drawer has a separate temperature control which regulates only the temperature of the drawer. The temperature control regulates how much refrigerated air is allowed to circulate into the drawer. Adjusting the control allows more or less air to circulate.

•Slide the control toward Produce for less cold air and toward Deli for more cold air.

Operation

Opening and Closing Doors

Ice Maker and Ice Storage Bin

IMPORTANT: Flush the water system before turning on the ice maker. See “Water and Ice Dispensers” section.

Turning the Ice Maker On/Off

The ice maker has an automatic shutoff. When the ice maker is on, sensors will automatically stop ice production when the storage bin is full. The ice maker will remain set to ON, and ice production will resume when the bin is no longer full.

To manually turn off the ice maker:

Press OPTIONS to display the OPTIONS screen. Pressing ICE MAKER, if the ice maker is currently on, will turn off the ice maker. The “Ice Maker Off” icon will flash three times and then stay lit. When the ice maker is set to OFF, it will stop producing ice.

Pressing ICE MAKER, if the ice maker is currently off, turns on the ice maker. The “Ice Maker Off” icon will disappear.

Removing and Replacing Ice Storage Bin

To Remove the Ice Storage Bin:

1.Hold the base of the storage bin and press the release button.

2.Pull out the storage bin.

To Replace the Ice Storage Bin:

IMPORTANT: It may be necessary to turn the auger driver, behind the ice bin, counterclockwise to properly align the ice bin with the auger driver. The ice storage bin must be locked in place for proper ice dispensing.

1. Slide the ice bin into the guide rails located on either side of the enclosure.

2. Push the ice bin in until resistance is felt. Raise the

front slightly and push the ice bin in until an audible “click” is heard.

Operation

There are two refrigerator compartment doors. The doors can be opened and closed either separately or together. There is a vertically-hinged seal on the left refrigerator door.

•When the left side door is opened, the hinged seal automatically folds inward so that it is out

of the way.

•When both doors are closed, the hinged seal automatically forms a seal between the two doors.

A

A. Hinged seal

Ice Production Rate

•Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

•The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period.

•To increase ice production, lower the freezer and refrigerator temperature. See “Using the Controls.” Wait 24 hours between adjustments.

NOTE: Setting the freezer to a colder temperature may make some foods, such as ice cream, harder.