Using the Controls (cont.)
•The preset temperatures should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
•Wait at least 24 hours between adjustments.
To view and adjust the set points, press and hold the TEMPERATURE button for 3 seconds. When adjust mode is activated, adjusting information will appear on the display screen.
Product Controls
NOTE: To view Celsius temperatures, press the LIGHT button when adjust mode is activated. To return the display setting to Fahrenheit, press LIGHT again.
•When adjust mode is activated, the display screen shows the refrigerator set point and “REFRIGERATOR” appears.
•Press LOCK to raise the set point, or press OPTIONS to lower the set point.
•When you have finished viewing (and adjusting if desired) the refrigerator set point, press TEMPERATURE to change the display to show the freezer set point. When the zone has been changed, “FREEZER” appears on the display screen.
•Press LOCK to raise the set point, or press OPTIONS to lower the set point.
•When you have finished viewing (and adjusting if desired) both the refrigerator and freezer set points, press MEASURED FILL to save the settings.
NOTE: To exit without saving changes, press ICE MODE at any time while in adjust mode, or allow about 60 seconds of inactivity and adjust mode will turn off automatically.
Using the Control (cont.)
When adjusting temperature set points, use the following chart as a guide.
Condition | Temperature Adjustment |
Refrigerator too cold | Refrigerator setting 1° higher |
|
|
Refrigerator too warm | Refrigerator setting 1° lower |
|
|
Freezer too cold | Freezer setting 1° higher |
Freezer too warm/too little ice | Freezer setting 1° lower |
|
|
The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C). The set point range for the freezer is
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is turned off.
•To turn cooling off, press and hold the LOCK and MEASURED FILL buttons at the same time for 3 seconds.
IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time
When cooling is off, “Refrigeration Cooling is Off” will appear on the display screen as shown.
•Press and hold LOCK and MEASURED FILL together for 3 seconds again to turn cooling back on.
Product Controls
8 | 9 |