Important Please Read and Follow, For Your Safety

IMPORTANT - PLEASE READ AND FOLLOW

•Before beginning, please read these instructions completely and carefully.

•Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty.

•Please observe all local and national codes and ordinances.

•Please ensure that this product is properly grounded.

•The installer should leave these instructions with the consumer who should retain for local inspector’s use and for future reference.

WARNING:

To reduce the risk of fire, electrical shock, or injury when using your refrigerated beverage center, follow basic precautions including the following:

•FOR YOUR SAFETY•

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. THE FUMES CAN CREATE A FIRE HAZARD OR EXPLOSION.

It is your responsibility to be sure your refrigerated beverage center is: •located so the front is not blocked to restrict incoming or discharge air flow. •properly leveled.

•located in a well ventilated area.

•connected to the proper kind of outlet, with the correct electric supply and grounding. A 115 volt, 60 Hz, 15 amp fused electrical supply is required. NOTE: Time delay fuse or circuit breaker is recommended.

•not used by anyone unable to operate it properly. •used only for its intended purpose.

•properly maintained.

•SAVE THESE INSTRUCTIONS•

PROPER DISPOSAL OF YOUR OLD REFRIGERATION PRODUCT

DANGER

SUFFOCATION HAZARD

Remove doors f rom your old refr igeration unit. Failure to do s o can result in c hild entrapment, which can cause death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerated beverage centers are still dangerous, even if they will sit for “just a few days.” If you are getting rid of your refrigerated beverage center, please follow the instructions below to help prevent accidents.

BEFORE YOU THROW AWAY YOUR OLD REFRIGERATION PRODUCT: •Take off the doors.

•Leave the shelves in place so that children may not easily climb inside.

GENERAL INFORMATION

Unpack

1.Remove banding from bottom of carton. Lift carton up and off of the unit.

2.Remove all tape and packaging material from the outside and inside of the cabinet.

3.Keep all carton packaging until your refrigerated beverage center has been thoroughly inspected and found to be in good condition.

AREA REQUIREMENTS

Units Certified for Indoor Use - (black outer cabinet)

MUST BE INSTALLED IN AN AREA PROTECTED FROM THE ELEMENTS, SUCH AS WIND, RAIN, WATER (SPRAY OR DRIP).

1.Place unit so the front side will be completely unobstructed to provide proper air flow. The unit may be closed in on the top and three sides, but the front MUST BE unobstructed for air circulation and proper operation. Installation should be such that the cabinet can be moved for servicing if necessary.

2.Unit should be in a well ventilated area with temperature above 55°F (13°C) and below 110°F (43°C). Best results are obtained at temperatures between 65°F (18°C) and 80°F (27°C) for built-in products and 65°F (18°C) and 90°F (32°C) for freestanding products.

3.Provisions for electricity should be determined before placing unit in proper place.

Units Certified for Outdoor Use - (stainless steel outer cabinet)

2.Unit should be in a well ventilated area with temperature above 40°F (4.4°C) and below 110°F (43°C). Best results are obtained at temperatures between 60°F (16°C) and 100°F (38°C).

3.Provisions for electricity should be determined before placing unit in proper place.

UNDERCOUNTER CABINET CUTOUT
	15” W. Models	24” W. Models
	15” W. Models	24” W. Models			A

A	15” (38.1 cm)*	24” (61.0 cm)*
A	15” (38.1 cm)*	24” (61.0 cm)*

B	Min. 34 1/2” (87.6 cm)	Min. 34 1/2” (87.6 cm)
B	Min. 34 1/2” (87.6 cm)	Min. 34 1/2” (87.6 cm)		B
	Max. 35 1/8” (89.2 cm)	Max. 35 1/8” (89.2 cm)	C	B
	Max. 35 1/8” (89.2 cm)	Max. 35 1/8” (89.2 cm)	C

C	24” (61.0 cm)	24” (61.0 cm)

*Add 1/4” (.64 cm) to cutout width if door is recessed between cabinets.

F20497 specifications

The Viking F20497 is a notable addition to the lineup of utility vehicles that prioritize performance, reliability, and versatility. Designed primarily for agricultural and off-road applications, the F20497 showcases a robust framework that stands out in its class.

One of the most commendable features of the Viking F20497 is its powerful engine. Equipped with a 4-stroke, liquid-cooled engine, it delivers impressive horsepower, allowing the vehicle to navigate through challenging terrains effortlessly. The engine is designed for optimal fuel efficiency, ensuring that operators can work longer hours without the frequent need for refueling.

The drivetrain is complemented by a seamless automatic transmission, enhancing the ease of use for operators. This transmission is engineered to deliver smooth gear shifts and provides the flexibility required for various applications, from hauling and towing to navigating steep inclines. The four-wheel drive (4WD) system further aids traction, making the F20497 a reliable companion for both work and recreational use.

In terms of size and dimensions, the F20497 is compact enough to maneuver in tight spaces while still providing ample cargo capacity. Its generous payload capacity makes it an excellent choice for transporting materials, tools, and equipment across fields or construction sites.

The Viking F20497 is designed with comfort and safety in mind. The spacious cab offers ample legroom and is equipped with ergonomic seating, ensuring that operators remain comfortable even during extended use. Additionally, the vehicle features a rugged design with reinforced chassis and body panels, making it capable of enduring rough handling.

Technologically, the F20497 stands out with its integrated digital display, which provides essential information at a glance. This feature enhances operational efficiency by allowing drivers to monitor speed, engine performance, and fuel levels easily.

Furthermore, the Viking F20497 is designed with environmental considerations in mind, as the engine adheres to the latest emission standards, making it a more eco-friendly choice for operators seeking to reduce their carbon footprint.

Overall, the Viking F20497 is a formidable utility vehicle that combines power, efficiency, and comfort, making it an ideal option for those in need of a reliable workhorse in demanding environments. Whether used for agricultural tasks, outdoor adventures, or job site operations, the features and capabilities of the F20497 ensure it remains a top contender in its category.