Settingthe Controls cont’d, Wine Shelves

SETTINGTHE CONTROLS (cont’d)

FOR OUTDOOR UNITS - it is recommended that in temperatures above 110ºF (43.3ºC) and below 40ºF (4.4ºC) the unit be shut off. The normal operating range for the unit is between 60ºF (15.6ºC) and 100ºF (37.8ºC).

General Tips and Suggestions

•After making a temperture adjustment, allow 24 hours for your refrigerated beverage center to reach a new temperature setting.

•The motor will start and stop often. It must do this to maintain the temperature setting. •Unplug the refrigerated beverage center before working on anything with the electrical system.

•Exercise caution when sweeping, vacuuming, or mopping near the front of the unit. Damage to the grill and/or the light fixture switch can occur.

WINE SHELVES

To load wine bottles on wine shelves, alternate the necks of the bottles, front to back (see illustrations below). The glass shelf above the wine shelf creates the separate temperature area. Do not remove if storing wine.

15” W.Wine Shelf		24” W. Wine Shelf

NOTE: The bottom wine shelf on a 24” W. model holds 4 bottles. Bottles do not alternate front to back.

CLEANING AND MAINTENANCE

Any piece of equipment works better and lasts longer when maintained properly and kept clean.

Condenser

The condenser tubing inside the cabinet does not require frequent cleaning; however, satisfactory cooling dependson adequate ventilation over the coils. Be sure that nothing obstructs therequired air flow openings in front of the cabinet. Spiders and insects can nest in and around the refrigerated beverage center causing damage to the unit. Frequently brush or vacuum lint and dirt from the condenser coils for efficient performance by unscrewing the grill on the bottom front of cabinet.

Cabinet

The cabinet can be washed with mild soap and water and thoroughly rinsed with clear water. Never use abrasive scouring powders.

Interior

Wash interior compartment with mild soap and water. Do not use abrasivepowder, solvent, polish cleaner or undiluted detergent.

Stainless Steel Parts

All stainless steel parts should be wiped regularly with hot soapy water. Use a liquid cleaner designed for stainless steel when soapy water will not do the job. Do not use steel wool, abrasive cloths, cleansers, or powders. Do not permit citrus or tomato juice to remain on stainless steel surfaces, as citric acid will permanently discolor stainless steel.

Brass Parts

CAUTION: All brass parts are coated with an epoxy coating. DO NOT USE BRASS OR ABRASIVE CLEANERS ON THE BRASS PARTS. All brass parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use every day non-abrasive household cleaners.

Glass Door (Indoor Units only)

Use a glass cleaner or mild soap and water with a soft cloth to clean the glass door. Do not use any abrasive powders. On full overlay models, use caution when cleaning near logo area.

Door Gasket

The vinyl gasket may be cleaned with mild soap and water, a baking soda and water solution, or a mild scouring powder.

Painted Surfaces

Wash with warm soapy water. DO NOT USE steel wool, abrasive cleansers, ammonia, acids or commercial oven cleaners which may damage the finish.

TROUBLESHOOTING CHART

Problem	Possible Cause	Solution
Odor in cabinet	•Unit interior needs cleaning.	•Clean inside of unit.
Noisy operation	•Unit not level.	•Adjust leveling legs.
Unit vibrates.	•Unit not level.	•Adjust leveling legs.
	•Weak floor.	•Rebuild floor or move to a different location.
Interior lighting not working.	•Light burned out.	•Replace light.
	•No power at outlet.	•Test outlet with lamp.
Appliance will not run.	•Control panel turned “OFF”.	•Turn unit on with on/off pad on control panel.
	•Power cord not plugged into power	•Plug unit into power source
	source
	•House fuse blown.	•Reset house fuse.
Appliance runs too long.	•Prolonged door openings.	•Reduce number and/or duration of openings.
	•Control panel set too cold.	•Raise temperature of unit via control panel.
	•Condenser needs cleaning.	•Clean condenser.
Moisture collects inside of unit.	•Too many door openings	•Reduce number of door openings.
	•Prolonged door openings.	•Reduce duration of door openings.
	•Hot, humid weather increases	•Move unit to cooler location.
	condensation.	•As humidity decreases, moisture will disappear.
Moisture collects on outside	•Hot, humid weather increases	•Move unit to a cooler location.
surface of the unit.	•Control improperly set.	•Reset to slightly warmer temperature.
Interior too hot/too cold	•Control improperly set.	•Reset control to desired temperature.
	•Faulty thermometer.	•Recheck with second thermometer.

F20497 specifications

The Viking F20497 is a notable addition to the lineup of utility vehicles that prioritize performance, reliability, and versatility. Designed primarily for agricultural and off-road applications, the F20497 showcases a robust framework that stands out in its class.

One of the most commendable features of the Viking F20497 is its powerful engine. Equipped with a 4-stroke, liquid-cooled engine, it delivers impressive horsepower, allowing the vehicle to navigate through challenging terrains effortlessly. The engine is designed for optimal fuel efficiency, ensuring that operators can work longer hours without the frequent need for refueling.

The drivetrain is complemented by a seamless automatic transmission, enhancing the ease of use for operators. This transmission is engineered to deliver smooth gear shifts and provides the flexibility required for various applications, from hauling and towing to navigating steep inclines. The four-wheel drive (4WD) system further aids traction, making the F20497 a reliable companion for both work and recreational use.

In terms of size and dimensions, the F20497 is compact enough to maneuver in tight spaces while still providing ample cargo capacity. Its generous payload capacity makes it an excellent choice for transporting materials, tools, and equipment across fields or construction sites.

The Viking F20497 is designed with comfort and safety in mind. The spacious cab offers ample legroom and is equipped with ergonomic seating, ensuring that operators remain comfortable even during extended use. Additionally, the vehicle features a rugged design with reinforced chassis and body panels, making it capable of enduring rough handling.

Technologically, the F20497 stands out with its integrated digital display, which provides essential information at a glance. This feature enhances operational efficiency by allowing drivers to monitor speed, engine performance, and fuel levels easily.

Furthermore, the Viking F20497 is designed with environmental considerations in mind, as the engine adheres to the latest emission standards, making it a more eco-friendly choice for operators seeking to reduce their carbon footprint.

Overall, the Viking F20497 is a formidable utility vehicle that combines power, efficiency, and comfort, making it an ideal option for those in need of a reliable workhorse in demanding environments. Whether used for agricultural tasks, outdoor adventures, or job site operations, the features and capabilities of the F20497 ensure it remains a top contender in its category.