Leveling, GAS Pressure Regulator, GAS Connections

If disconnection of the restraint is necessary, turn off the gas supply before disconnection. Reconnect this restraint prior to turning the gas supply on and returning the range to its installation position.

If the range is installed on casters and is moved for any reason, it is recommended that the range be re-leveled front to back and side to side for even baking.

LEVELING

To level the range, place a carpenter's level on the range top and check leveling of the unit side to side and front to rear. Achieve leveling by turning each foot section of the unit's leg as needed. Turning the foot in a counter clockwise direction will increase height and clockwise will decrease.

GAS PRESSURE REGULATOR

A preset gas pressure regulator and street elbow is shipped with the range. This regulator must be installed by an authorized service person before the unit is placed into operation. See full unit data plate located on the rear of the range, or the secondary data plate, riveted to the kick panel, for pressure regulator setting information. If a manometer is being used, utilizing one of the available pressure taps in the manifold, the manifold pressure with one burner on should be ± 0.3" W.C. of the value indicated on the rating plate.

1.Locate the gas connection pipe protruding through the back of the unit.

2.Cover the pipe threads with pipe joint compound resistant to propane gases.

3.Screw the regulator onto the pipe hand tight with flow direction arrow pointing towards the back of the unit and the regulator adjustment in the up right position.

4.With a pipe wrench, tighten the regulator securely in the upright position. (The regulator is preset and should not require any additional adjustments.) The pressure regulator must be mounted horizontally to ensure the proper preset outlet pressure. If mounted in any other direction, the outlet pressure must be rechecked and possibly reset. A leak limiter is supplied with every regulator to allow excess gas pressure to escape. Do not obstruct the limiter or the gas regulator, as obstruction may cause the regulator to malfunction.

GAS CONNECTIONS

All gas supply connections and any pipe joint compound used must be resistant to the action of propane gases.

Prior to lighting, check all joints in the gas supply line for leaks. Use soap and water solution. Do not use an open flame.

After piping has been checked for leaks, all piping receiving gas should be fully purged to remove air.

TESTING THE GAS SUPPLY SYSTEM

When test pressures exceed ½ psig (3.45 kPa), the range and its individual shutoff valve must be disconnected from the gas supply piping system.

When test pressures are ½ psig (3.45 kPa) or less, the range must be isolated from the gas supply system by closing its individual manual shutoff valve.

- 6 -

C36(S, C), C48SS, C48(S, C60(S specifications

The Wolf C72(S,C)(S,C24S,C60(S,C48(S is a cutting-edge multi-functional platform designed to meet the diverse needs of modern industries. This system integrates advanced technologies to enhance productivity, efficiency, and reliability in various applications.

Equipped with a robust processing engine, the Wolf C72 features a high-performance CPU, which enables rapid data processing and multitasking capabilities. This is complemented by an extensive memory architecture, allowing it to handle large datasets while maintaining high-speed performance. Users can expect seamless operation even under heavy workloads, making it suitable for demanding environments.

One of the standout features of the Wolf C72 is its flexible modular design, which allows for customizable configurations. This adaptability means that organizations can tailor the system to their specific needs, ensuring optimal performance across multiple functions. Whether it's in manufacturing, logistics, or data management, the platform can be adjusted to fit different operational requirements.

The Wolf C72 also incorporates state-of-the-art connectivity options, including Wi-Fi, Ethernet, and Bluetooth, enabling it to integrate effortlessly into existing networks. This connectivity ensures that data can be shared and accessed in real-time, fostering collaboration and improving response times in decision-making processes.

In terms of user experience, the Wolf C72 is designed with an intuitive interface that simplifies operations. Users can navigate through various functionalities with ease, reducing the learning curve and enhancing overall productivity. Moreover, the system supports various industrial protocols, ensuring compatibility with existing equipment and systems.

Security is also a top priority for the Wolf C72. It features advanced encryption methods and secure access controls, protecting sensitive data from unauthorized access. This focus on security helps businesses comply with industry regulations and safeguard their information.

Moreover, the Wolf C72 is built with sustainability in mind. Energy-efficient components and intelligent power management systems reduce energy consumption, making it an environmentally friendly choice for modern businesses.

In summary, the Wolf C72(S,C)(S,C24S,C60(S,C48(S is a versatile and powerful platform that combines performance, flexibility, and security. Its innovative technologies and user-centric design make it an ideal solution for organizations looking to enhance their operational capabilities while embracing the demands of a rapidly evolving industrial landscape.