OPERATING YOUR BREVILLE PROFESSIONAL 800 COLLECTION™ ESPRESSO MACHINE (continued)
STEP 5 - PRIMING THE GROUP HEAD
• Before placing the fi lter holder into position, it is recommended to run a short fl ow of water through the group head.
•Place a container or empty cup under the group head.
•With the fi lter holder removed, prime the group head by pressing and holding down the single or double cup button for approximately 5 seconds. Refer to ‘Manual Espresso’, page 17.
A pumping noise will be heard during this operation, and water will run through the group head.
STEP 6 - INSERTING THE FILTER HOLDER
Place the fi lter holder underneath the group head so that the handle is aligned with the insert graphic. Insert the fi lter holder up into the group head and rotate the handle to the right until resistance is felt, this will be at an approximate 90° angle to the machine.
STEP 7 – BREWING THE COFFEE
•Ensure all the button surrounds on the control panel are illuminated, indicating the machine has reached the correct temperature for brewing, and is ready for use.
•Ensure the drip tray and fi lter holder are in place.
•Place one or two
PROGRAMMED ESPRESSO – ONE CUP
Press the one cup 
button once. After a few seconds, aromatic coffee will begin to pour into the cup. A pumping noise will be heard in this operation. The machine will automatically stop once the preset pour has been delivered.
16
BES820 IB V6.indd 16
19/9/0719/9/07 2:23:492:23:49 PMPM