Filling the Water Tank, PRE-WARMING the Cups

OPERATING YOUR BREVILLE PROFESSIONAL 800 COLLECTION™ ESPRESSO MACHINE

STEP 1 - FILLING THE WATER TANK

•Ensure the Power button is in the ‘Off’ position and the Selector Control, on the side of the machine, is set to the Standby position.

•Switch the machine off at the power outlet and unplug the power cord.

•Remove the ﬁ lter holder if locked into the brew head and move the steam wand to the side of the machine.

•Remove the water tank by sliding out using the handle insert in the front of the water tank.

•As the water tank is removed, a black tube slides and extends out from the water tank storage area. Do not touch or try to remove this tube, it will automatically slide back into position when the water tank is re inserted.

•Fill the water tank with cold, tap water to the maximum mark on the water window and slide the water tank carefully back into position in the machine.

•Ensure the Selector Control is in the ‘Standby’ position and plug the power cord into a 230/240V power outlet and switch on.

•Press the POWER button to ‘On’, the POWER button surround will ﬂ ash while the machine is heating. When the correct temperature has been reached, all the button surrounds on the control panel will illuminate.

NOTE: Check the water level before use and replace the water daily. The water tank should be reﬁlled with fresh, cold tap water before each use. Do not use mineral or distilled water or any other liquid.

STEP 2 - PRE-WARMING THE CUPS

•The Cup Warming Plate will start to warm as the machine heats.

•Pre-warm the espresso cups by placing on the Cup Warming Plate. This will help maintain the coffee’s optimal temperature when brewed into the cups.

BES820 IB V6.indd 14

19/9/0719/9/07 2:23:472:23:47 PMPM