Breville BKC600XL/BKC700XL manual Brewing hot water, Refilling the water tank, Purging the brewer

Page 10

Operating your breville gourmet single cup brewer™

Operating your breville gourmet single cup brewer™

NOTE:

The My K-Cup®accessory is designed for ground coffee only. Do not:

a)Use a K-Cup®or coffee pod in the My K-Cup®Filter Basket.

b)Use the My K-Cup®Filter Basket with the K-Cup®Holder After brewing with the My K-Cup®accessory, the K-Cup®Holder must be inserted into the Brewing Chamber in order to brew a K-Cup®.

To replace the K-Cup®Holder, raise the Safety Locking Arm, and remove the My K-Cup®Holder. Insert K-Cup®Holder into the Brewing Chamber, aligning the arrow on the K-Cup®Holder with the arrow in the Brewing Chamber. Use caution when doing this as there

is a sharp needle on the underside of the Brewing Chamber Head that punctures the K-Cup®.

SROPPING THE BREW PROCESS

To stop brewing after the process has started, press and release the Power Switch on the right side of the Brewer to the ‘OFF’ status. The flow of coffee, tea or hot cocoa will stop, the heating element will shut off and the LED’s illuminating the Water Tank will no longer be lit. The LCD screen will indicate the time, ‘ON-OFF TIME’ and ‘AUTO OFF’. None of the control panel buttons will be active until the Brewer is turned back on.

NOTE:

You may get less coffee, tea or hot cocoa during your next brew. After a terminated brew, we recommend that you follow the instructions for Brewing hot water (page 18). Your next brew will then dispense the correct volume according to the brew size you have selected.

Brewing hot water

The Brewer is able to dispense a cup of hot water for making hot chocolate in a packet, for use in cooking, for making soups, etc.

Follow the instructions Brewing a K-Cup® (page 12), without inserting a K-Cup®.

NOTE:

After brewing a hot cocoa K-Cup®, or stopping the brew process mid-cycle, we recommend running a hot water brew cycle.

Refilling the water tank

The LCD screen will indicate ‘REFILL TANK’ when the water level in the Water Tank is low or if the Water Tank has been removed.

1.Fill the Water Tank with water up to the 'MAX' mark on the viewing window. The Water Tank can be filled in two ways:

a)Remove the Water Tank Lid and pour water directly into the Water Tank while it is still attached to the Brewer, then replace the Lid.

b)Remove the Water Tank Lid, then gripping the handle located on the left side of the Water Tank, lift upwards. Fill with water. Place the Water Tank back onto the Brewer and replace the Lid.

2.The LCD screen will indicate either:

a)‘OPEN HEAD’. Raise and lower the Safety Locking Arm completely.

b)‘HEATING’ as the Brewer heats the water for the next brew cycle. This process lasts about 15 seconds. The pump will make a vibrating sound. This is normal.

3.Once the Safety Locking Arm is opened and lowered, or the water is heated, the LCD screen will indicate ‘READY TO BREW’, indicating the brew cycle

can begin. The and buttons will illuminate and the ‘BREW’ button will illuminate and flash for up to 60 seconds.

NOTE:

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

Do not remove the Water Tank during the brewing process.

Purging the brewer

If the Brewer has not been used for more than one week, you should renew the water from the inner tank by purging the brewer.

1.If there is water in the Water Tank, remove the Water Tank Lid, then gripping the handle located on the left side of the Water Tank, lift upwards. Discard the water, rinse and refill with bottled or filtered water. Place the Water Tank back onto the Brewer and replace the Lid.

2.If there is no water in the Water Tank, refill with water. Place the Water Tank back onto the Brewer and replace the Lid.

3.Ensure the Brewer is turned on. Raise and lower the Safety Locking Arm on the Brewer without inserting a K-Cup®.

4.The LCD screen will indicate ‘READY TO BREW’ and the ‘BREW’ button will illuminate and flash.

5.The LCD screen will indicate the default brew size (7.25 oz. serving unless programmed otherwise). Select the largest brew size (11.25 oz. serving) by pressing the button on the control panel.

6.Place a 12 oz. mug on the Drip Tray Plate. The drip tray plate and drip tray can be removed to accomodate taller mugs and travel mugs.

7.Press the ‘BREW’ button. Hot water will flow into your mug. When the flow stops, discard the hot water.

8.Repeat this process 2 more times to completely renew the water from inner tank.

18

 

19

 

 

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Gourmet Single Cup Brewer Contents CongratulationsIf the outlet is a standard 2-prong wall Call Breville Customer Service atOr adjustment Outlet, it is your personal responsibilityKnow your breville gourmet single cup brewer Water tank lid Drip tray plate Brewing chamber headOperating your breville gourmet single cup brewer Installing the water filterOperating Remove the Water Tank LidOne-time priming process Your Brewer is ready for the one-time priming processLCD screen will indicate ‘READY Brewing a K-CupSeconds Brewing with the My K-Cup Accessory LCD screen will indicate ‘READY to BREW’LCD screen will indicate the default brew size 7.25 oz.. To Purging the brewer Brewing hot waterRefilling the water tank LCD screen will indicate eitherMenu & Programming Setting the ‘CLOCK SET’ featureMenu & programming options Setting the ‘AUTO OFF’ Feature Setting the ‘ON-OFF TIME’ featurePress the button to reach Setting the ‘BREW TEMP’ feature Setting the ‘BREW SIZE’ featureCleaning the brewer housing Care & CleaningCare & cleaning Cleaning the K-CupHolderCleaning the water filter Cleaning the My K-CupaccessoryCleaning the water tank and lid Descaling the brewerStorage BKC600XL Priming InstructionsTROUBLESHooting AskUs@BrevilleUSA.com AskUs@Breville.caFélicitations Table des matièresBreville recommande la sécurité avant tout Instructions Concernant LE Cordon Court La rallonge doit être munie dune fiche à trois brochesSécurité Fonctionnement Installation du filtre à eauEnlevez le couvercle du réservoir Processus de préparation initiale Pour la préparation initiale de la BKC600XL, consultez laInfusion d’un K-Cup ’écran ACL indiquera ‘READY to BREW’ Prêt à infuser Infusions avec l’accessoire my K-cupInsérez le panier du filtre dans le support Page Arrêt du processus d’infusion Infusion d’eau chaudeVidange du système d’infusion Remplissage du réservoir d’eauLécran ACL indiquera soi Menu et options de programmation Menu ET Options DEProgrammation Réglage de l’horloge ‘Clock set’Réglage de la fonction Auto OFF Arrêt automatique Heure de Mise en marche/Arrêt‘OK’ pour sélectionner cette fonction Réglage de la Fonction Brew Temp Température dinfusion Réglage DE LA Fonction Brew Size Format dinfusionMenu et options de programmation Entretien et nettoyage Un nettoyage régulier du support à K-Cupest recommandéEntretien ET Nettoyage Nettoyage de la chambre d’infusionNettoyage du filtre à eau Nettoyage de l’accessoire K-cupNettoyage du réservoir d’eau et du couvercle Détartrage du système d’infusionPréparation initiale de la BKC600XL Appuyez sur le bouton ‘BREW’ infusionDépannage Veuillez contacter notre Centre de service ÉTATS-UNISAskUs@BrevilleUSA.com Canada AskUs@Breville.caBreville Customer Service Center

BKC600XL/BKC700XL specifications

The Breville BKC600XL and BKC700XL are advanced single-serve coffee makers designed to deliver café-quality beverages in the comfort of your home. These models stand out with their eye-catching aesthetic and user-friendly design, catering to the needs of coffee enthusiasts who appreciate both convenience and flavor.

One of the most notable features of these machines is their versatility. They are compatible with a variety of K-Cup pods, providing users with an abundance of coffee options without the need for complex setups. Additionally, the BKC700XL model includes a reusable coffee filter, allowing you to brew your favorite ground coffee while minimizing waste.

When it comes to brewing capabilities, Breville has integrated a patented brew technology that ensures optimum extraction. This technology controls the water temperature and brew time for a perfect cup every time. Users can choose from a range of cup sizes, including 6, 8, or 10 ounces, making it easy to customize your brewing experience based on your preferences or mood.

The thermal carafe and removable drip tray are practical features that enhance usability. The thermal carafe maintains the coffee's temperature for hours, minimizing the need for a warming plate that can alter flavor over time. The removable drip tray caters to different cup sizes, ensuring that your favorite mug fits comfortably under the dispenser.

Another innovative characteristic of the BKC600XL/BKC700XL is the automatic shut-off feature, which adds a layer of convenience and safety. After a set period of inactivity, these coffee makers power down to conserve energy.

Moreover, the sleek design and high-quality materials, including brushed stainless steel, not only enhance the aesthetic appeal but also ensure durability. Both models feature an intuitive control panel with backlit buttons for easy navigation, allowing users to brew with just a few presses.

In summary, the Breville BKC600XL and BKC700XL k-cup coffee makers combine versatility and technology to provide an exceptional coffee experience. With their advanced brewing technology, customizable cup sizes, ease of use, and stylish design, these machines are perfect for anyone looking to enjoy high-quality coffee at home. Investing in one of these models guarantees a flavorful start to your day, with the convenience that modern coffee lovers demand.
Top Page Image Contents