Breville BKC600XL/BKC700XL manual One-time priming process

Page 6

Operating your breville gourmet single cup brewer™

Operating your breville gourmet single cup brewer™

8.Set the date dial on the Upper Filter Holder 2 months ahead. This will remind you when the Charcoal Filter will need to be replaced.

9.Place the assembled Filter Holder into the Water Tank, aligning so the date dial is visible from outside the Tank. Push down hard on the assembled Filter Holder until it snaps into place.

10.Your Brewer is ready for the one-time priming process.

NOTE:

Replace the Water Filter every

2 months, or 60 tank refills, more if you have hard water.

To order replacement Water Filters, visit www.breville.com.

We recommend removing the Water Filter if you choose not to replace the Water Filter every 2 months, as the filter may clog and affect the smell and taste of the water.

One-time priming process

Priming fills the internal tank with water and cleanses the brewing system. You cannot use your Brewer until it has been primed for its first use.

NOTE:

If the Brewer has been exposed to temperatures below freezing, allow the Brewer at least two hours to reach room temperature before priming. A frozen or extremely cold Brewer will not prime properly and can cause damage.

1.Unwrap the power cord and plug the Brewer into a grounded outlet.

2.Place a 12 oz. mug on the Drip Tray Plate. The drip tray plate and drip tray can be removed to accomodate taller mugs and travel mugs.

3.Fill the Water Tank with water up to the 'MAX' mark on the viewing window.

The Water Tank can be filled in two ways:

a)Remove the Water Tank Lid and pour water directly into the Water Tank while it is still attached to the Brewer, then replace the Lid.

b)Remove the Water Tank Lid, then gripping the handle located on the left side of the Water Tank, lift upwards. Fill with water. Place the Water Tank back onto the Brewer and replace the Lid.

NOTE:

Do not use water that has been treated by a 'water softener'. The increase in sodium levels in the water can cause scaling in the brewer and hinder its performance.

4.Press and release the Power Switch located on the lower back, right side of the Brewer. The Power Switch is spring loaded and will return to its original position.

NOTE:

For BKC600XL priming information, please refer to page 30.

5.The Water Tank LED and LCD screen will illuminate. The Brewer will automatically fill with water and make a quiet vibrating sound. This is normal. The LCD screen will indicate 'HEATING'.

NOTE:

If the Water Tank is empty or not in place on the Brewer, the Water Tank LED’s will flash and the LCD screen will indicate ‘REFILL TANK’. None of the control panel buttons will be active until water is added to the Water Tank.

6.Once the water is heated, the LCD screen will indicate 'OPEN HEAD'. Open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely. Do not insert a K-Cup®during this process. This will allow you to run a cleansing brew. The 'BREW' button will now be illuminated.

7.Press the 'BREW' button. This will start a cleansing brew which will complete the priming sequence. Hot water will flow into your mug. When the water flow stops, discard the hot water.

NOTE:

The Brewer will take about 4 minutes to heat up during the priming process.

8.The LCD screen will indicate ‘HEATING’ as the Brewer heats the water for the next brew cycle. Once the water is heated, the LCD screen may indicate ‘REFILL TANK’.

9.Fill the Water Tank with water up to the 'MAX' mark on the viewing window.

10.The LCD screen will indicate ‘OPEN HEAD’. Open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely. The LCD screen will indicate ‘READY TO BREW’.

11.The one-time priming process is now complete and you are ready for your first K-Cup®brew (page 12) or My K-Cup®brew (page 14).

10

 

11

 

 

 

Image 6
Contents Gourmet Single Cup Brewer Contents CongratulationsIf the outlet is a standard 2-prong wall Call Breville Customer Service atOr adjustment Outlet, it is your personal responsibilityKnow your breville gourmet single cup brewer Water tank lid Drip tray plate Brewing chamber headOperating your breville gourmet single cup brewer Installing the water filterOperating Remove the Water Tank LidOne-time priming process Your Brewer is ready for the one-time priming processBrewing a K-Cup LCD screen will indicate ‘READYSeconds Brewing with the My K-Cup Accessory LCD screen will indicate ‘READY to BREW’LCD screen will indicate the default brew size 7.25 oz.. To Purging the brewer Brewing hot waterRefilling the water tank LCD screen will indicate eitherSetting the ‘CLOCK SET’ feature Menu & ProgrammingMenu & programming options Setting the ‘ON-OFF TIME’ feature Setting the ‘AUTO OFF’ FeaturePress the button to reach Setting the ‘BREW TEMP’ feature Setting the ‘BREW SIZE’ featureCleaning the brewer housing Care & CleaningCare & cleaning Cleaning the K-CupHolderCleaning the water filter Cleaning the My K-CupaccessoryCleaning the water tank and lid Descaling the brewerStorage BKC600XL Priming InstructionsTROUBLESHooting AskUs@BrevilleUSA.com AskUs@Breville.caFélicitations Table des matièresBreville recommande la sécurité avant tout Instructions Concernant LE Cordon Court La rallonge doit être munie dune fiche à trois brochesSécurité Installation du filtre à eau FonctionnementEnlevez le couvercle du réservoir Processus de préparation initiale Pour la préparation initiale de la BKC600XL, consultez laInfusion d’un K-Cup Infusions avec l’accessoire my K-cup ’écran ACL indiquera ‘READY to BREW’ Prêt à infuserInsérez le panier du filtre dans le support Page Arrêt du processus d’infusion Infusion d’eau chaudeRemplissage du réservoir d’eau Vidange du système d’infusionLécran ACL indiquera soi Menu et options de programmation Menu ET Options DEProgrammation Réglage de l’horloge ‘Clock set’Heure de Mise en marche/Arrêt Réglage de la fonction Auto OFF Arrêt automatique‘OK’ pour sélectionner cette fonction Réglage de la Fonction Brew Temp Température dinfusion Réglage DE LA Fonction Brew Size Format dinfusionMenu et options de programmation Entretien et nettoyage Un nettoyage régulier du support à K-Cupest recommandéEntretien ET Nettoyage Nettoyage de la chambre d’infusionNettoyage du filtre à eau Nettoyage de l’accessoire K-cupNettoyage du réservoir d’eau et du couvercle Détartrage du système d’infusionPréparation initiale de la BKC600XL Appuyez sur le bouton ‘BREW’ infusionDépannage Veuillez contacter notre Centre de service ÉTATS-UNISAskUs@BrevilleUSA.com Canada AskUs@Breville.caBreville Customer Service Center

BKC600XL/BKC700XL specifications

The Breville BKC600XL and BKC700XL are advanced single-serve coffee makers designed to deliver café-quality beverages in the comfort of your home. These models stand out with their eye-catching aesthetic and user-friendly design, catering to the needs of coffee enthusiasts who appreciate both convenience and flavor.

One of the most notable features of these machines is their versatility. They are compatible with a variety of K-Cup pods, providing users with an abundance of coffee options without the need for complex setups. Additionally, the BKC700XL model includes a reusable coffee filter, allowing you to brew your favorite ground coffee while minimizing waste.

When it comes to brewing capabilities, Breville has integrated a patented brew technology that ensures optimum extraction. This technology controls the water temperature and brew time for a perfect cup every time. Users can choose from a range of cup sizes, including 6, 8, or 10 ounces, making it easy to customize your brewing experience based on your preferences or mood.

The thermal carafe and removable drip tray are practical features that enhance usability. The thermal carafe maintains the coffee's temperature for hours, minimizing the need for a warming plate that can alter flavor over time. The removable drip tray caters to different cup sizes, ensuring that your favorite mug fits comfortably under the dispenser.

Another innovative characteristic of the BKC600XL/BKC700XL is the automatic shut-off feature, which adds a layer of convenience and safety. After a set period of inactivity, these coffee makers power down to conserve energy.

Moreover, the sleek design and high-quality materials, including brushed stainless steel, not only enhance the aesthetic appeal but also ensure durability. Both models feature an intuitive control panel with backlit buttons for easy navigation, allowing users to brew with just a few presses.

In summary, the Breville BKC600XL and BKC700XL k-cup coffee makers combine versatility and technology to provide an exceptional coffee experience. With their advanced brewing technology, customizable cup sizes, ease of use, and stylish design, these machines are perfect for anyone looking to enjoy high-quality coffee at home. Investing in one of these models guarantees a flavorful start to your day, with the convenience that modern coffee lovers demand.