Breville BKC600XL/BKC700XL manual Brewing a K-Cup, LCD screen will indicate ‘READY, Seconds

Operating your breville gourmet single cup brewer™

Operating your breville gourmet single cup brewer™

Brewing a K-Cup®

1.Follow the instructions, Installing the Water Filter (page 9) and the One-time Priming Process (page 10). The Brewer should be turned on and the Water Tank should be filled and illuminated.

2.The LCD screen will indicate ‘READY

TO BREW’. The and buttons will illuminate and the ‘BREW’ button will illuminate and flash for up to

60 seconds.

NOTE:

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

3.Place a cup or mug on the Drip Tray Plate. The drip tray plate and drip tray can be removed to accomodate taller mugs and travel mugs.

4.Raise the Safety Locking Arm. The Brewing Chamber will open toward you.

5.Select a K-Cup®.

6.Place the K-Cup®in the K-Cup®Holder (located in the Brewing Chamber). Do not remove the foil lid or puncture the K-Cup®.

NOTE:

There are two sharp needles that puncture the K-Cup®. One on the underside of the Brewing Chamber Head and the other in the base of the K-Cup®Holder. To avoid risk of injury, do not put your fingers in the Brewing Chamber or K-Cup®Holder.

7.Lower the Safety Locking Arm to close the Brewing Chamber Head over the K-Cup®Holder. When closed completely, the LCD screen will indicate

‘READY TO BREW’. The and buttons will illuminate and the ‘BREW’ button will illuminate and flash for up to 60 seconds.

a)The LCD screen will indicate the default brew size (7.25 oz.). To choose

a different size, press the button to go up in size or the button to go down in size.

NOTE:

Select from a stronger small cup (5.25 oz. serving), a small mug (7.25 oz. serving), a large mug (9.25 oz. serving), a travel mug (11.25 oz. serving) or iced beverage setting (3.25oz serving). The iced beverage setting is only available on the the BKC700XL.

The small mug (7.25 oz. serving) is the default brew size.

To program your favorite brew size, refer to Setting the ‘BREW SIZE’ feature (page 24).

NOTE:

To use the iced beverage setting, place a tall glass filled with ice on the drip tray. Use your favorite K-Cup®, select the iced beverage brew size button. Add more ice once brewing is complete, add cream and sugar if desired. The iced beverage setting is only available on the BKC700XL.

b)Once the brew size is selected, press the ‘BREW’ Button. The ‘BREW’

button will stop flashing, the and buttons will no longer be lit. The LCD screen will indicate ‘BREWING’ and the selected brew size.

NOTE:

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

8.The LCD screen will indicate ‘BREWING’, however there may be a short pause before the brewing process begins. The process lasts about 60 seconds and ends with a burst of air to remove all liquid from the K-Cup®.

12 13