Clarion installation manual Product Specs, APX200.2M

Page 14

APX200.2M Power System Amplifier

Problem

Distorted audio.

Solution

Gain is not set properly, or damaged speaker cones. Review Setting Gain; inspect each speaker cone for signs of damage (i.e. frozen cone, burning smell, etc.)

Problem

Audio lacks punch.

Solution

Speakers wired incorrectly, which causes cancellation of bass frequencies. Check polarity of wires from amplifier to each speaker as defined by the system design.

Problem

Amplifier fuse keeps blowing.

Solution

Incorrect wiring or short circuit. Review Installation and check all wiring connections.

Problem

Whining or ticking noise in the audio with engine on.

Solution

Amplifier is picking up alternator noise or radiated noise. Turn down input gain; move audio cables away from power wires. Check power and ground connections on amplifier; install an in-line noise filter on source unit's power wire; check alternator and/or voltage regulator; test for weak battery or add water to battery.

PRODUCT SPECS

 

APX200.2M

Frequency Response

20Hz ~ 20kHz

Signal Noise Ratio

>100db

THD

.05% all channels driven

Input Sensitivity Low Level

250mV ~ 2.5 V

Input Sensitivity Speaker Level

500mV ~ 5V

Max. Power Output

220W (110Wx 2)

Cont. Power Output

100W (50w x 2) @ .08% THD

2-Ohm Stereo Output

110 x 2 @ .05% THD

Bridged Power

220 x 1 @ .05% THD

Dimensions

2-1/8"H x 8-1/4"W x 9" L

Current Consumption at output

 

@ max power

28A @ 382 Watts

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operational Installation Manual Introduction About the Manual and WarrantyTable of Contents Description Input Connections and Audio ControlsHigh-pass/Low-pass Filter Controls Connections for Power and Speakers Applications Channel Full-Range, Satellite, or Subwoofer Stereo System Mixed-Mode Satellite and Subwoofer System Wiring Precautions InstallationMounting Precautions APX200.2M Power System Amplifier Electrical connections for the APX200.2M Setting the Bass Boost Setting the GainSetting the Crossover Troubleshooting Final System ChecksProduct Specs APX200.2MPage APX200.2M-10 Rev.1 03/01

APX200 specifications

The Clarion APX200 is an advanced mobile audio processing unit designed to enhance the audio experience in vehicles. Renowned for its exceptional sound quality and innovative technologies, the APX200 represents the cutting-edge of in-car entertainment solutions.

One of the standout features of the APX200 is its multi-channel configuration, allowing users to connect up to 16 channels of output. This flexibility enables the setup of complex audio systems tailored to individual preferences and vehicle acoustics. With a built-in digital signal processor (DSP), the APX200 provides extensive tuning capabilities, giving users the power to adjust parameters such as equalization, crossover settings, and time alignment for optimal sound staging.

The device supports high-resolution audio formats, ensuring that every nuance of the music is reproduced with fidelity. Users can take advantage of its high-performance DACs, which convert digital audio signals into analog with stunning clarity. The APX200 is also equipped with advanced noise-cancelling technology, reducing background noise and enhancing overall listening quality.

Another impressive aspect of the Clarion APX200 is its user-friendly interface. The unit features an intuitive touchscreen display that allows for easy navigation through settings and adjustments. The built-in Bluetooth functionality enables wireless streaming, allowing users to play music from their smartphones or other devices seamlessly.

The APX200 is designed with installation flexibility in mind. Its compact size and versatile mounting options make it suitable for a range of vehicle types without taking up unnecessary space. The robust build quality ensures durability, allowing the unit to withstand the rigors of daily use.

In addition to sound quality and ease of use, the Clarion APX200 incorporates advanced connectivity options. It includes multiple input types, including auxiliary and USB inputs, enabling users to connect various audio sources without hassle.

In summary, the Clarion APX200 is a top-tier mobile audio processor offering a rich feature set designed to elevate any in-car audio experience. With its powerful DSP, high-resolution audio support, and user-friendly interface, it stands out as a formidable choice for automotive audio enthusiasts looking to create their perfect soundscape. Whether enjoying music on a long drive or setting up a custom audio system, the APX200 provides the tools necessary for an unparalleled listening experience.
Top Page Image Contents