Clarion APX200 installation manual Final System Checks, Troubleshooting

Page 13

OWNER’S MANUAL

FINAL SYSTEM CHECKS

1.Start the engine and turn on the source unit. After a two-second delay, slowly increase the Volume Control and listen to the audio. If you hear any noise, static, distortion or no sound at all, check the connections, and also refer to Troubleshooting. Depending on your system design, the levels may become quite loud even at low Volume Control settings. Until you get an "audio feel" of the system's power, use care when adjusting controls.

2.Turn the Balance Controls to their extreme positions and listen to the results. Audio imaging should match control settings (audio from the left speaker when balance is left).

3.Increase the volume and verify that the amplifier reproduces audio (at full frequencies) without distortion. If you hear distortion, check the connections and verify that the Gain Control is set correctly. Another possibility is damaged speakers or under-powered speakers. Once again refer to Troubleshooting for additional help.

TROUBLESHOOTING

Problem

No Audio.

Solution

Low or no remote turn-on voltage. Check remote connections at amplifier and source unit.

Blown amplifier fuse. Replace with new fast-blow fuse (same rating).

Power wires not connected. Check battery and ground wiring at amplifier; also check battery connections.

Speaker leads shorted. Check speaker continuity to ground, it should not show a common ground.

Speakers not connected or are blown. Check speaker connections at amplifier, measure coil impedance.

Problem

Audio cycles on and off.

Solution

Thermal protection circuits are shutting amplifier off. Check location for adequate ventilation; consult an authorized Clarion Audio Dealer.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operational Installation Manual Table of Contents About the Manual and WarrantyIntroduction Input Connections and Audio Controls DescriptionHigh-pass/Low-pass Filter Controls Connections for Power and Speakers Applications Channel Full-Range, Satellite, or Subwoofer Stereo System Mixed-Mode Satellite and Subwoofer System Mounting Precautions InstallationWiring Precautions APX200.2M Power System Amplifier Electrical connections for the APX200.2M Setting the Crossover Setting the GainSetting the Bass Boost Final System Checks TroubleshootingAPX200.2M Product SpecsPage APX200.2M-10 Rev.1 03/01

APX200 specifications

The Clarion APX200 is an advanced mobile audio processing unit designed to enhance the audio experience in vehicles. Renowned for its exceptional sound quality and innovative technologies, the APX200 represents the cutting-edge of in-car entertainment solutions.

One of the standout features of the APX200 is its multi-channel configuration, allowing users to connect up to 16 channels of output. This flexibility enables the setup of complex audio systems tailored to individual preferences and vehicle acoustics. With a built-in digital signal processor (DSP), the APX200 provides extensive tuning capabilities, giving users the power to adjust parameters such as equalization, crossover settings, and time alignment for optimal sound staging.

The device supports high-resolution audio formats, ensuring that every nuance of the music is reproduced with fidelity. Users can take advantage of its high-performance DACs, which convert digital audio signals into analog with stunning clarity. The APX200 is also equipped with advanced noise-cancelling technology, reducing background noise and enhancing overall listening quality.

Another impressive aspect of the Clarion APX200 is its user-friendly interface. The unit features an intuitive touchscreen display that allows for easy navigation through settings and adjustments. The built-in Bluetooth functionality enables wireless streaming, allowing users to play music from their smartphones or other devices seamlessly.

The APX200 is designed with installation flexibility in mind. Its compact size and versatile mounting options make it suitable for a range of vehicle types without taking up unnecessary space. The robust build quality ensures durability, allowing the unit to withstand the rigors of daily use.

In addition to sound quality and ease of use, the Clarion APX200 incorporates advanced connectivity options. It includes multiple input types, including auxiliary and USB inputs, enabling users to connect various audio sources without hassle.

In summary, the Clarion APX200 is a top-tier mobile audio processor offering a rich feature set designed to elevate any in-car audio experience. With its powerful DSP, high-resolution audio support, and user-friendly interface, it stands out as a formidable choice for automotive audio enthusiasts looking to create their perfect soundscape. Whether enjoying music on a long drive or setting up a custom audio system, the APX200 provides the tools necessary for an unparalleled listening experience.
Top Page Image Contents