KitchenAid 4KSRF42DT Cabinet is in the OFFpbsition, Remove tape from rear

Page 10

51Move refrigerator close to final position. Remove

n cardboard or plywood from under refrigerator. Plug electrical cord into the grounded outlet. Use the screw from the parts package to install the plug retainer. Move the refrigerator evenly and straight into the opening. Check that the water line will not be kinked. Check that slack in the electrical cord hangs freely behind refrigerator or is placed on top of refrigerator next to cover.

m

El. Check that the power switch at the too of the

cabinet is in the “OFF”pbsition.

Connect the fitting to the refrige,rator water valve. Do Not over-tighten. (If necessary, the water valve can be removed from the underside of the cabinet to attach the fitting. You may have to remove the wiring channel to get to the valve. Remove the screw between the coils of the

17 %

Remove tape from rear

. leveling rods. Turn the two leveling rods clockwise using a 516” (8 mm) socket and ratchet until the cabinet weight is supported by the rear legs. Use l-318” (35 mm) open end wrench to lower the front leveling legs until the weight of the cabinet is supported by legs.

side/ trim

L

19If side panels are not used, n go to Step 10. Read Side

panel requirements, page 5, before attaching side panels to refrigerator.

/

water valve. Remove the disconnected water valve and attach the fitting. Replace the water valve.) Slide compression nut and sleeve on tubing with fitting for water valve. Connect the union from the water supply line to the compression nut on the tubing from the water valve. Tighten with an adjustable wrench. Do Not overtighten.

Turn the water supply valve to the open position. Turn the refrfgerator switch to the “ON”position. Check all connections for leaks.

Page 9

18Open both doors. Place a level against the underside

n of the door trim at the top of the refrigerator. Adjust the front leveling legs until level and to the right height for the recessed area. Place the level on the crisper guide in the refrigerator section to check for levelness front to back. Turn the right, rear leveling rod until level and to the required height. Place the level on the freezer basket guide to level the left side of the cabinet.

Remove all tape and door bracina from

refrfgerator door. Remove the six screws that attach the handle to the door frame. Slide the refrfgerator door panel into door frame. If the panel is less than l/4” (6 mm) thick, a filler panel will need to be installed between the door and decorative panel. If the decorative panel is more than l/4” (6 mm) thick, it will have to be routed to have a l/4”

(6 mm) edge on all sides. See Custom panel and insert dimensions for exact sizes to cut custom panels.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents KiCtchmmA#d Before you start To install panels and insertsParts that must be ordered separately or custom-made Wall Dimensions for built-in areaOuhded electrical Let location LocationLevelers Top grille Product dimensionsLevelers extended l/8 3 mm below rollers OptlonalLr--JA Custom door panels, handle Inserts and top grille panelsSide trim Side panel requirements +I-l/8 3 mm toleranceRefrlgerator Mm depth is available, go to stepTo do so may result In water damage Use only 114 6 mm copper tublng for water IlneProduct/Properly Damage Hazard Tubing you will need. Cut both ends of copper tubing squareMm above the cover Product supportIf soffit Is more than one inch Now start Cabinet is in the OFFpbsition Remove tape from rearEl Check the water If built-in refrigerator does not operate How to arrange for ServiceIf you need Assistance

4KSRF42DT specifications

The KitchenAid 4KSRF42DT is a standout appliance in the world of refrigeration, combining style, functionality, and advanced technology to enhance any modern kitchen. This refrigerator offers a blend of design and performance, making it a popular choice for both home cooks and culinary enthusiasts.

One of the main features of the 4KSRF42DT is its spacious capacity. With a generous 42-inch width, this unit provides ample storage space for groceries, leftovers, and other kitchen essentials. The interior is thoughtfully designed with adjustable shelves, allowing users to customize the layout based on their needs. Additionally, the refrigerator includes specialized compartments, such as a humidity-controlled crisper drawer and a dedicated deli drawer, ensuring that fruits, vegetables, and meats are stored in optimal conditions to maintain freshness.

The 4KSRF42DT is equipped with advanced cooling technologies that enhance temperature control and energy efficiency. The refrigerator uses a dual cooling system, which helps prevent the mixing of odors between the refrigerator and freezer compartments. This technology ensures that food retains its natural flavors and maintains its quality for longer. Moreover, the unit is designed with a stainless-steel exterior that is not only sleek and modern but also resistant to smudges and fingerprints, making it easy to maintain its polished look.

Another remarkable feature of this KitchenAid refrigerator is its integrated water and ice dispenser. The dispenser provides users with easy access to filtered water and ice cubes, promoting hydration and convenience. The filtration system ensures that the water is clean and taste-free, a necessity for any family kitchen.

The intuitive control panel located on the exterior of the unit is user-friendly, allowing for precise adjustments to temperature settings and easily accessing features. Other characteristics, such as LED lighting, illuminate the contents of the refrigerator, making it easy to find what you need, even in low lighting. This energy-efficient lighting not only enhances visibility but also helps reduce electricity consumption.

In summary, the KitchenAid 4KSRF42DT is more than just a refrigerator; it is a stylish, functional, and technologically advanced appliance designed to meet the demands of modern kitchens. With its spacious interior, advanced cooling features, integrated water and ice dispenser, and user-friendly controls, this refrigerator is an excellent choice for those seeking both practicality and elegance in their kitchen.
Top Page Image Contents