El Check the water

ml If you wish to change

. the door handle insert, slide insert trim into

handle. See Custom panel and insert dimensions for exact sizes to cut custom inserts. Insert end caps into each end of door handle. Replace refrigerator door handle. (Some end caps are attached with screws.)

to refrigerator. Check that the power switch is in the “ON”position. Attach top grille decorative panel assembly to the keyhole bracket on the frame and pull down to secure. If the top grille decorative panel does not fit evenly within frame, the keyhole bracket can be moved side to side by adjusting the bracket screws or the decorative panel bracket can be moved up or down by adjusting the decorator panel bracket nuts.

ml8Open both doors. Use two screws to attach bottom grille to cabinet.

Loosen the four height adjustment screws. Adjust the bottom grille to fill the space from the floor to the bottom of the cabinet. Tighten adjustment screws.

112Repeat Steps 10 and 11 n for the freezer door.

11 Remove two nuts from one end of the top panel

. frame. Remove end piece. Slide decorative panel into panel frame. Replace end piece using nuts.

Check that

top grille is aligned with top trim on cabinet. Use ten screws to lighten top grille frame

set screws ,

Personal injury Hazard

Reinstall set screws after door swlng is set.

Failure to so could result in personal injury.

115Check.1that doors can open freely. If not, the door stops can be

adjusted. Loosen set screw in top and bottom hinges with Allen wrench. Determine the door swing desired. Hold door in that position and tighten the set screws. The doors have stops at 90°, 115” and 137Opositions. If the door stops cannot be adjusted to clear countertops, the countertops may need to be mitered. (Consult your builder to adjust countertops.)

. connections at the bottom of the refrigerator

again for leaking. Any leaking can cause refrigerator and floor damage.

(18Put shelves and bins

. into the refrigerator and freezer compartments.

Remove protective film from door frame.

Move the ice maker arm into the down position. Set refrigerator and

freezer compartment controls to the midpoint between “COLD”and “COLDEST”. Check that the compressor is operating properly. Check that all five interior lights and one exterior light above dispenser area are working.

/20Use a drinking glass to

. press ice dispenser bar. You should hear the

motor and auger operating. Press the glass against the water dispenser bar. Dispense and discard 2 to 3 quarts (1.9 to 2.8 liters) of water to remove air from system and rinse tank.

To get the most efficient use from your new built-in refrigerator, read your KitchenAid’ Use and Care Guide. Keep Ins talla tion Ins true tions and Guide close to built-in refrigerator for easy reference.

Page 10

4KSRF42DT specifications

The KitchenAid 4KSRF42DT is a standout appliance in the world of refrigeration, combining style, functionality, and advanced technology to enhance any modern kitchen. This refrigerator offers a blend of design and performance, making it a popular choice for both home cooks and culinary enthusiasts.

One of the main features of the 4KSRF42DT is its spacious capacity. With a generous 42-inch width, this unit provides ample storage space for groceries, leftovers, and other kitchen essentials. The interior is thoughtfully designed with adjustable shelves, allowing users to customize the layout based on their needs. Additionally, the refrigerator includes specialized compartments, such as a humidity-controlled crisper drawer and a dedicated deli drawer, ensuring that fruits, vegetables, and meats are stored in optimal conditions to maintain freshness.

The 4KSRF42DT is equipped with advanced cooling technologies that enhance temperature control and energy efficiency. The refrigerator uses a dual cooling system, which helps prevent the mixing of odors between the refrigerator and freezer compartments. This technology ensures that food retains its natural flavors and maintains its quality for longer. Moreover, the unit is designed with a stainless-steel exterior that is not only sleek and modern but also resistant to smudges and fingerprints, making it easy to maintain its polished look.

Another remarkable feature of this KitchenAid refrigerator is its integrated water and ice dispenser. The dispenser provides users with easy access to filtered water and ice cubes, promoting hydration and convenience. The filtration system ensures that the water is clean and taste-free, a necessity for any family kitchen.

The intuitive control panel located on the exterior of the unit is user-friendly, allowing for precise adjustments to temperature settings and easily accessing features. Other characteristics, such as LED lighting, illuminate the contents of the refrigerator, making it easy to find what you need, even in low lighting. This energy-efficient lighting not only enhances visibility but also helps reduce electricity consumption.

In summary, the KitchenAid 4KSRF42DT is more than just a refrigerator; it is a stylish, functional, and technologically advanced appliance designed to meet the demands of modern kitchens. With its spacious interior, advanced cooling features, integrated water and ice dispenser, and user-friendly controls, this refrigerator is an excellent choice for those seeking both practicality and elegance in their kitchen.