KitchenAid 4KSRF42DT Before you start, Parts that must be ordered separately or custom-made

Page 2

Before you start...

Proper installation is your responsibility. Make sure you have everything necessary for correct installation. it is the responsibility of the installer to comply with the installation specifications provided.

The built-in refrigerator weighs over 400 Ibs (181 kg). The floor must be sturdy enough to support this weight plus the additional weight of door panels, food and ice.

Grounded electrical outlet is required. See Electrical requirements.

Location of the built-in refrigerator must permit the doors to open to at least 90°.

Because of the weight and size of the built-in refrigerator, two or more people are needed to move and safely install it.

Dimensions that are shown must be used. Given dimensions provide required 0” clearance.

One inch of space is required between side of refrigerator and a corner wall to allow the door to open to at least a 90” angle.

NOTE:

It Is the customer’s responsibility:

l To contact a qualified electrical installer.

9To assure that electrical installation Is adequate and in

Personal Injury Hazard

l Because of the welght and size of the bull+In refrlgerator, two or more people are needed to move and safely Install It.

lMost of the refrlgerator’s welght Is at the top. Extra care Is needed when movlng the refrlgerator to prevent Upping.

Failure to do so could result In personal Injury

Floor Damage

Keep cardboard shipplng piece or plywood under refrlgerator until It Is installed In operatlng posltlon.

Failure to do so maycause damage to floor covering.

Important: Observe all governing codes and ordinances.

Failure to meet codes and ordinances could lead to fire or electrical shock hazard.

Tools and materials needed for installation:

Parts supplied for installation:

top grille assembly base grille

tube assembly misc. parts bag Icemaker bin assembly

Remove parts from packages. Check that ail parts were included.

Parts that must be ordered separately or custom-made:

Acrylic door panel kits

Three colors of acrylic door panel kits are available from your KitchenAid dealer: White, Black and Almond. Each kit includes door panels, top grille panels and handle inserts. Follow kit instructions

to install panels and inserts.

Klt Numbers for Acrylic Panels

;I

Custom door panels, handle inserts and top grille panels

See page 4 for custom panel dimensions and page 9, steps 9 -13 for installation.

Side panels

Check with your builder or installer to see if you need side panels that match your kitchen cabinets. Side panels must be custom-made. Side panel dimensions are given

conformance wlth local codes and ordinances.

Electrical Shock Hazard

Special care must be taken when drilling holes into the wall of the house. ElectrIcal wlres may be concealed behind wall coverlng.

Phllllps screwdrlver 5/16”(6 mm) and 3/4” (19 mm) sockeI

and ratchet l/4” (6 mm) copper

tublng

tubing cutler eppllance dolly

116” (3 mm) Allen wrench adjustable wrench cardboard or plywood 6, #6, or larger wood

screws

2, wood boards - 32” (613 mm) fong (See page 7 for speclflcatlons.)

1 - 3/8” (35 mm) open wrench - front leveler

stepladder wrench set knlk

3116” (5 mm) and 114”

(6 mm) drill bits

drill screwdrlver level bucket shutoff valve stud locator

l/4” (6 mm) nut driver

on page 5.

Page 1

Image 2
Contents KiCtchmmA#d Parts that must be ordered separately or custom-made To install panels and insertsBefore you start Wall Dimensions for built-in areaOuhded electrical Let location LocationLevelers Top grille Product dimensionsLevelers extended l/8 3 mm below rollers OptlonalLr--JA Custom door panels, handle Inserts and top grille panelsSide trim Side panel requirements +I-l/8 3 mm toleranceRefrlgerator Mm depth is available, go to stepTo do so may result In water damage Use only 114 6 mm copper tublng for water IlneProduct/Properly Damage Hazard Tubing you will need. Cut both ends of copper tubing squareIf soffit Is more than one inch Product supportMm above the cover Now start Cabinet is in the OFFpbsition Remove tape from rearEl Check the water If you need Assistance How to arrange for ServiceIf built-in refrigerator does not operate

4KSRF42DT specifications

The KitchenAid 4KSRF42DT is a standout appliance in the world of refrigeration, combining style, functionality, and advanced technology to enhance any modern kitchen. This refrigerator offers a blend of design and performance, making it a popular choice for both home cooks and culinary enthusiasts.

One of the main features of the 4KSRF42DT is its spacious capacity. With a generous 42-inch width, this unit provides ample storage space for groceries, leftovers, and other kitchen essentials. The interior is thoughtfully designed with adjustable shelves, allowing users to customize the layout based on their needs. Additionally, the refrigerator includes specialized compartments, such as a humidity-controlled crisper drawer and a dedicated deli drawer, ensuring that fruits, vegetables, and meats are stored in optimal conditions to maintain freshness.

The 4KSRF42DT is equipped with advanced cooling technologies that enhance temperature control and energy efficiency. The refrigerator uses a dual cooling system, which helps prevent the mixing of odors between the refrigerator and freezer compartments. This technology ensures that food retains its natural flavors and maintains its quality for longer. Moreover, the unit is designed with a stainless-steel exterior that is not only sleek and modern but also resistant to smudges and fingerprints, making it easy to maintain its polished look.

Another remarkable feature of this KitchenAid refrigerator is its integrated water and ice dispenser. The dispenser provides users with easy access to filtered water and ice cubes, promoting hydration and convenience. The filtration system ensures that the water is clean and taste-free, a necessity for any family kitchen.

The intuitive control panel located on the exterior of the unit is user-friendly, allowing for precise adjustments to temperature settings and easily accessing features. Other characteristics, such as LED lighting, illuminate the contents of the refrigerator, making it easy to find what you need, even in low lighting. This energy-efficient lighting not only enhances visibility but also helps reduce electricity consumption.

In summary, the KitchenAid 4KSRF42DT is more than just a refrigerator; it is a stylish, functional, and technologically advanced appliance designed to meet the demands of modern kitchens. With its spacious interior, advanced cooling features, integrated water and ice dispenser, and user-friendly controls, this refrigerator is an excellent choice for those seeking both practicality and elegance in their kitchen.