KitchenAid 2200139A Door Closing, Base Grille, To remove the base grille, To replace the grille

Page 11

25 and 27 cu. ft.

25 and 27 cu. ft.

Freezer door

Refrigerator door

panel dimensions

panel dimensions

Door Closing

Your refrigerator has 2 front adjustable rollers — one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the

1/4"

(6.35 mm)

5/16"

(7.93 mm)

207/16"

(51.91 cm)

1415/16"

(37.94 cm)

633/8"

(160.97 cm)

1415/16" (37.94 cm)

1/4" (6.35 mm)

5/16"

(7.93 mm)

1911/16" (50.01 cm)

refrigerator's tilt using the instructions below:

1.

Plug in refrigerator.

2.

Move the refrigerator into its final position.

3.

Remove the base grille (see “Base Grille” earlier in this

 

section). The two leveling screws are part of the front

 

roller assemblies which are at the base of the

 

refrigerator on either side.

4.

Use a screwdriver to adjust the leveling screws. Turn

 

the leveling screw to the right to raise that side of the

 

refrigerator or turn the leveling screw to the left to lower

5/16"

(7.93 mm)

1/4" (6.35 mm)

281/2"

(72.4 cm)

5/16"

(7.93 mm)

1/4" (6.35 mm)

that side. It may take several turns of the leveling

screws to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top of the

refrigerator takes some weight off the leveling screws

and rollers. This makes it easier to adjust the screws.

3/4" min.

3 1/4"

 

3/4"

3 1/4"

3/4" min.

3/4"

(19.05 mm min.)

(82.55 mm min.)

(82.55 mm min.) (19.05 mm min.)

 

(19.05 mm)

(19.05 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TOP VIEW

 

 

 

 

 

 

 

 

 

TOP VIEW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/4"

 

 

 

 

 

1/4"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(6.35 mm)

 

 

 

 

 

(6.35 mm)

Base Grille

To remove the base grille:

1.Open both refrigerator doors.

2.Place hands along the ends of the grille, with your thumbs along the top. Push in with your thumbs and pull up on the bottom.

NOTE: Be sure to refasten the Tech Sheet behind the base grille after cleaning.

To replace the grille:

1.Open the doors.

2.Line up the grille support tabs with the metal clips.

3.Push the grille firmly to snap it into place.

5.Open both doors again and check to make sure that they close as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns, and you should turn both leveling screws the same amount.

6.Replace the base grille.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 2200139A Table DES Matières ContentsBefore you throw away your old refrigerator or freezer Refrigerator SafetyYour safety and the safety of others is very important Not shown in illustration above/optional on some models Parts and FeaturesOther parts and features Removing packaging materials Installing YourCleaning before use Space RequirementsRecommended Grounding Method Electrical RequirementsRemoving the Doors Water System Preparation Please read before using the water systemCold Water Supply Connecting to water lineTo a Water Source Read all directions carefully before you beginRefrigerator Door Connecting to refrigeratorFactory Trim Kit Removing the Door PanelsCare of Decorator Panels Installing Custom Wood PanelsReplacing the Door Panels To remove the base grille 27 cu. ft Freezer door Refrigerator door Panel dimensionsDoor Closing Base GrilleChecking airflow Using Your RefrigeratorUnderstanding Sounds You May Hear Ensuring Proper Air CirculationRefrigerator section Turn Too warm Setting the ControlsAdjusting Control Settings Storing frozen food Food Storage GuideStoring fresh food Freezing Refrigerator FeaturesIce Maker Storage Bin Do not useTo dispense ice Ice dispenserWater dispenser Dispenser lock on some models Water filter indicator lightWater Filtration Monitoring System Dispenser lightRefrigerator Shelves Using the dispenser without the water filterOrdering replacement filters Shelves and shelf frames Deli DrawerConvertible Vegetable/Meat Drawer and Cover Slide-out shelves on some modelsTo remove the crisper Adjusting the controlCrisper and Crisper Cover Crisper Humidity ControlDoor Rails Door AccessoriesFreezer Basket Caring for Your RefrigeratorFreezer Shelf Freezer Light Bulbs Refrigerator Light BulbsUpper freezer light on some models Power InterruptionsVacation and Moving Care VacationsLights do not work Trouble ShootingMoving Your refrigerator will not operateIce maker is producing too little ice Motor seems to run too muchRefrigerator seems to make too much noise Ice maker is not producing iceDispenser water is not cool enough Ice dispenser will not operate properlyWater dispenser will not operate properly Water or ice is leaking from the dispenserDoors will not close completely Temperature is too warmDivider between the two compartments is warm There is interior moisture build-upCanada Assistance Or ServiceU.S.A KitchenAid will not pay for For warranty information in CanadaWater Filter Certifications Gallons 1893 Liters Product Data SheetAvant de jeter votre vieux réfrigérateur ou congélateur Votre sécurité et celle des autres est très importanteNon illustrées ci-dessus/facultatives sur certains modèles Autres pièces et caractéristiquesNettoyage avant l’utilisation Déballage de votre RéfrigérateurEspacement requis Enlèvement des matériaux d’emballageOutils requis Méthode recommandée de mise à la terreSpécifications électriques Enlèvement des portesPAS Enlever LA VIS 1, TEL QU’INDIQUÉ Dans LE Schéma Veuillez lire avant l’installationRaccordement à une canalisation d’eau Arrivée d’eau froideRaccordement au réfrigérateur Entretien des panneaux décoratifs Remplacement des panneaux de porteEnsembles décoratifs De l’usine Enlèvement des panneaux de la porteGrille de la base Installation de panneaux en bois sur commandeLes bruits de l’appareil que Vous pouvez entendre Fermeture des portesVérification de l’air Réglage des commandesPour s’assurer d’une Conservation des aliments frais Ajustement des réglages De contrôleGuide d’entreposage Des aliments Ne pas utiliser Recommandations pour l’emballageConservation des aliments congelés EmballageLe distributeur de glaçons Caractéris Tiques DUBac d’entreposage de la Machine à glaçons Distributeurs d’eau et De glaçonsDistribution d’eau Le distributeur d’eauTémoin lumineux du distributeur Distribution de glaçonsLe témoin lumineux du filtre à eau Remplacement de la cartouche de filtre à eauUtilisation de la fontaine réfrigérée sans filtre à eau Commande de filtres de rechangeTablettes du réfrigérateur Tablettes et cadres de tablette Casier pour petits alimentsTiroir et couvercle Convertibles pour légumes Viande Tablettes sur roulettes sur certains modèlesAjustement du réglage Réinstaller le bac à légumes en suivant l’ordre inversePour réinstaller le couvercle du bac à légumes Bac à légumes et couvercleTringles dans la porte Accessoires de porteLes bacs à légumes Nettoyage du réfrigérateur Entretien DE VotreClayette de congélateur Panier du congélateurAutres conseils de nettoyage indiqués ci-dessous Lumière en arrière du tableau de commandeAmpoules d’éclairage du réfrigérateur Lumière au-dessous du bac à glaçons Pannes de courantAmpoules d’éclairage du congélateur Lumière des bacs sur certains modèlesDéménagement VacancesLe moteur semble fonctionner excessivement DépannageLes ampoules n’éclairent pas Le plat de dégivrage contient de l’eauLe distributeur de glaçons ne fonctionne pas correctement La machine à glaçons ne produit pas de glaçonsLa machine à glaçons produit trop peu de glaçons Mauvais goût, odeur ou couleur grise des glaçons’eau du distributeur n’est pas assez froide Le distributeur d’eau ne fonctionne pas bien’eau ou la glace coule du distributeur Les portes ne se ferment pas complètement La cloison entre les deux sections est tièdeLa température est trop tiède Il y a une accumulation d’humidité à l’intérieurAu Canada Assistance OU ServiceAux États-Unis Garantie DE Réfrigérateur Kitchenaid Liters 500 gallons Certifications DE Filtre À EAU2200139A

2200139A specifications

The KitchenAid 2200139A is an indispensable appliance for home cooks and culinary enthusiasts who seek reliability and performance in their kitchen. This stand mixer is designed to streamline food preparation tasks, making it a go-to solution for those who frequently whip up doughs, batters, and a variety of other ingredients.

One of the main features of the KitchenAid 2200139A is its powerful 300-watt motor, designed to handle tough ingredients with ease. The tilt-head design allows for easy access to the bowl and attachments, ensuring convenience during food preparation. The mixer comes equipped with a 4.5-quart stainless steel bowl, providing ample capacity for mixing larger batches without compromising on stability or performance. The bowl is also dishwasher-safe, making cleanup a breeze.

The KitchenAid 2200139A offers ten different speed settings. This versatility allows users to mix at a slow stir to a fast whip, accommodating a wide range of tasks from kneading bread dough to whipping cream. This precision ensures that ingredients are combined perfectly, resulting in superior textures and flavors in every dish.

In addition to its powerful motor and variable speeds, this stand mixer comes with several essential attachments, including a flat beater, dough hook, and wire whip. These attachments help expand culinary possibilities, enabling users to tackle virtually any recipe. The power hub on the stand mixer allows for the connection of various optional attachments, such as pasta makers and food grinders, transforming the unit into a multifunctional culinary tool.

Another standout characteristic of the KitchenAid 2200139A is its robust construction. Built with high-quality materials, this appliance promises durability, making it suitable for everyday use. Its classic design also fits seamlessly into any kitchen decor, available in a variety of colors to match personal style preferences.

The KitchenAid 2200139A is not just about performance; it also emphasizes ease of use. The ergonomic handle and control dial are designed for comfortable operation, while the unit’s stability and low center of gravity minimize movement during mixing, providing a safe and worry-free cooking experience.

In summary, the KitchenAid 2200139A stand mixer stands out for its powerful motor, versatile speed settings, generous bowl capacity, and accessory compatibility. Its thoughtful design and durable construction make it a reliable addition to any kitchen, helping home cooks explore their culinary creativity with ease.
Top Page Image Contents