Setting Up Your Hand Mixer
Attaching the Accessories | 4. Insert the accessory with a collar (D) into |
| the larger opening (B) of the Hand Mixer. |
Be sure to read and follow the specific | Line up the flanges on the accessory with |
instructions in this manual for proper use | the slots in the opening and push in until |
of this Hand Mixer. | it locks into place. |
1.Make sure the Speed Control is in the “OFF” position.
2.Unplug the Hand Mixer from the electrical outlet.
3.Each pair of accessories (Turbo Beater™ accessories, optional Dough Hooks ) will have one accessory with a collar (D), and one without (C). The Hand Mixer has a specific opening for each. Single accessories, like the optional Whisk
or Liquid Blender Rod, will always have a collar (D).
CD
B
D
5.Insert the accessory without a collar (C) into the smaller opening (A) of the
Hand Mixer. Line up the flanges on the accessory with the slots in the opening and push in until it locks into place.
AB
Removing the Accessories
1.Make sure the Speed Control is in the “OFF” position.
2.Unplug the Hand Mixer from the electrical outlet.
3.Press the Ejector Button to release the accessories from the Hand Mixer, then remove them.
English
9