Electronic Ignition System

Initial lighting and gas flame adjustments

Cooktop and oven burners use pilotless igniters in place of standing pilots. When the cooktop control knob is turned to the “LITE” position, the system creates a spark to light the burner. This sparking continues, as long as the control knob is turned to “LITE.”

When the oven control is turned to the desired setting, a glow bar igniter heats and ignites the gas.

Check Operation of Cooktop Burners

Standard Surface Burners

Push in and turn each control knob to the “LITE” position.

The flame should light within 4 seconds. The first time a burner is lit it may take longer that 4 seconds to light because of air in the gas line.

If burners do not light properly:

■Turn cooktop control knob to the “OFF” position.

■Check that the range is plugged in and the circuit breaker has not tripped or the household fuse has not blown.

■Check that the gas shutoff valves are set to the “open” position.

■Check that burner caps are properly positioned on burner bases.

Repeat start-up. If a burner does not light at this point, turn the control knobs to “Off” and contact your dealer or authorized service company for assistance.

Adjust Flame Height

Adjust the height of top burner flames. The cooktop “low” burner flame should be a steady blue flame approximately ¼" (0.64 cm) high.

A.Low flame

B.High flame

To adjust standard burners:

The flame can be adjusted using the adjustment screw in the center of the valve stem. The valve stem is located directly underneath the control knob.

If the “low” flame needs to be adjusted:

1.Light 1 burner and turn to lowest setting.

2.Remove the control knob.

Hold the knob stem in the low position using a pair of pliers. Use an ¹⁄₈" (3.0 mm) flat-blade screwdriver to turn the screw located in the center of the control knob stem until the flame is the proper size.

3.Replace the control knob.

4.Test the flame by turning the control from “LO” to “HI,” checking the flame at each setting.

5.Repeat above steps for each burner.

Check Operation of Oven Bake Burner

1.Remove the oven rack.

2.Using a Phillips screwdriver, remove the 2 bake burner cover screws.

3.Lift up on rear of bake burner cover and remove.

4.Place cover on a protected surface.

A. Bake burner cover

B. Bake burner cover screws

5.Press BAKE. “BAKE” and temperatures will show in the display.

6.Press either Quickset pad or the control panel next to the temperature on the display.

The igniter used to light the bake burner will glow. Once the igniter is hot the oven bake burner should light. Under certain conditions it may take up to 60 seconds for it to light.

Adjust Oven Bake Burner Flame (if needed)

1.Remove storage drawer.

2.Check the oven bake burner for proper flame.

This flame should have a ½" (1.3 cm) long inner cone of bluish-green, with an outer mantle of dark blue, and should be clean and soft in character. No yellow tips, blowing or lifting of flame should occur.

Freestanding Gas Ranges specifications

KitchenAid Freestanding Gas Ranges are designed for both amateur home cooks and seasoned culinary enthusiasts, providing a blend of performance, style, and innovative technology. These ranges stand out in the kitchen not just for their functionality, but also for their sleek, professional appearance that can elevate any kitchen decor.

One of the flagship features of KitchenAid Gas Ranges is the Even-Heat True Convection system. This technology utilizes a unique fan and a third heating element to ensure that hot air circulates evenly around the oven, allowing for consistent baking results. Whether you’re roasting meats or baking pastries, this feature guarantees thorough cooking and browning across all racks, significantly enhancing culinary outcomes.

Another notable characteristic is the versatility offered by the various burners. KitchenAid Freestanding Gas Ranges typically include multiple burners with varied BTU outputs, providing options for simmering delicate sauces as well as high-heat cooking for searing and sautéing. The powerful burners are designed to accommodate large pots and pans for family meals or entertaining guests.

The Professional-style design is complemented by features like the premium matte black finish and sturdy grates, which provide a professional-grade cooking surface. Many models come with a large capacity oven, allowing for the cooking of multiple dishes simultaneously. The steam rack, available on certain models, enables more cooking techniques, including steaming vegetables or infusing moisture into baked goods.

Smart capabilities are another important aspect of KitchenAid Gas Ranges. With features like Wi-Fi connectivity, home cooks can control their ovens remotely, preheat the oven from their smartphone, or even receive alerts when their dish is ready. These intelligent technologies not only add convenience but also enable users to multitask effectively.

Safety is paramount in KitchenAid Gas Ranges, which come equipped with features such as a flame failure device that automatically shuts off the gas supply if a burner goes out. The easy-to-clean surfaces and removable grates ensure that upkeep is hassle-free, allowing users to maintain a clean and organized kitchen.

In conclusion, KitchenAid Freestanding Gas Ranges offer a wealth of features that enhance both cooking performance and convenience. With innovative technologies, a professional aesthetic, and a commitment to safety, they provide a comprehensive cooking solution that meets the demands of modern lifestyles. Whether you're preparing a simple weeknight dinner or hosting a festive gathering, KitchenAid delivers the tools and technology needed to inspire culinary creativity.