KitchenAid Freestanding Gas Ranges Installation Requirements, Tools and Parts

Page 3

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air.

It is the installer’s responsibility to comply with installation

Tools needed

Tape measure

Phillips screwdriver

Flat blade screwdriver

¹⁄₈" flat blade screwdriver

Level

Hand or electric drill

Wrench or pliers

Pipe wrench

¹⁵⁄₁₆" combination wrench

¹⁄₈" (3.2 mm) drill bit (for wood floors)

Marker or pencil

Pipe-joint compound resistant to LP gas

³⁄₁₆" (4.8 mm) carbide-tipped masonry drill bit (for concrete/ceramic floors)

Noncorrosive leak-detection solution

For LP/Natural Gas

Conversions

½" combination wrench

⁹⁄₃₂" (7.0 mm) nut driver

Masking tape

clearances specified on the model/serial rating plate. The

model/serial rating plate is located behind the storage drawer

on the right-hand side of the oven frame.

The range should be located for convenient use in the

kitchen.

Recessed installations must provide complete enclosure of

the sides and rear of the range.

To eliminate the risk of burns or fire by reaching over heated

surface units, cabinet storage space located above the

surface units should be avoided. If cabinet storage is to be

provided, the risk can be reduced by installing a range hood

or microwave hood combination that projects horizontally a

minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

All openings in the wall or floor where range is to be installed

must be sealed.

Cabinet opening dimensions that are shown must be used.

Given dimensions are minimum clearances.

Parts supplied

Check that all parts are included.

LP/Natural Gas Conversion Kit (taped near left rear leg, inside storage drawer compartment)

2 - Burner grates

5 - Burner caps

2 - Oven racks (3 on some models)

2 - #12 x 1⁵⁄₈" screws (for mounting anti-tip bracket)

Anti-tip bracket (taped inside storage drawer)

Anti-tip bracket must be securely mounted to the back wall or floor. Thickness of flooring may require longer screws to anchor bracket to subfloor. Longer screws are available from your local hardware store.

Parts needed

Check local codes and consult gas supplier. Check existing gas supply and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” sections.

The floor anti-tip bracket must be installed. To install the anti-

tip bracket shipped with the range, see “Install Anti-Tip

Bracket” section.

Grounded electrical supply is required. See “Electrical

Requirements” section.

Proper gas supply connection must be available. See “Gas

Supply Requirements” section.

Contact a qualified floor covering installer to check that the

floor covering can withstand at least 200°F (93°C).

Use an insulated pad or ¼" (0.64 cm) plywood under range if

installing range over carpeting.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

3

Image 3
Contents GAZ Autoportantes DE 30 76,2 CM Instructions Pour L’INSTALLATION DES CuisinièresYour safety and the safety of others are very important Range SafetyInstallation Requirements Tools and PartsLocation Requirements Mobile Home Additional Installation Requirements Product Dimensions Cabinet DimensionsMobile home installations require Natural gas Electrical RequirementsGas Supply Requirements Type of GasBurner Input Requirements Gas Supply Pressure TestingGas Supply Line Gas Pressure RegulatorInstallation Instructions Adjust Leveling LegsUnpack Range Floor Mounting Install Anti-Tip BracketMake Gas Connection Typical flexible connectionVerify Anti-Tip Bracket Location Level RangeComplete connection Electronic Ignition System Check Operation of Oven Broil Burner Complete InstallationAdjust Oven Broil Burner Flame if needed Replace Oven Racks and Storage DrawerGAS Conversions LP Gas ConversionTo Convert Gas Pressure Regulator To Convert Oven Broil Burner To Convert Oven Bake BurnerTo Convert Surface Burners LP Gas Orifice Spud Chart Burner Rating Color NumberNatural Gas Conversion Locate the oven orifice hood from the front of the range Natural Gas Orifice Spud Chart Burner Rating Color Number Votre sécurité et celle des autres est très importante Sécurité DE LA CuisinièreExigences D’INSTALLATION Exigences demplacementOutillage et pièces Dimensions du produit Spécifications électriques Dimensions du placardSpécifications de l’alimentation en gaz Type de gazCanalisation de gaz Instructions Dinstallation Déballage de la cuisinièreRéglage des pieds de nivellement Installation de la bride antibasculement Montage au plancherMontage au mur Raccordement au gaz Raccordement typique par raccord flexibleTerminer le raccordement Vérification de lemplacement de la bride Antibasculement Réglage de laplomb de la cuisinièreSystème dallumage électronique Contrôle du fonctionnement du brûleur de cuisson au four Contrôle du fonctionnement du brûleur du grilSil est nécessaire de régler la taille des flammes Si la cuisinière ne fonctionne pas, contrôler ce qui suit Réinstallation des grilles de four et du tiroir De remisageAchever l’installation Réinstallation du tiroir de remisageConversions Pour Changement DE GAZ Conversion de Gaz naturel à PropaneConversion du détendeur Conversion du brûleur du four Conversion des brûleurs de surface Conversion du brûleur du grilConversion pour lalimentation au gaz naturel Conversion du brûleur de cuisson au four Conversion du brûleur du gril Chapeau de W10188242A

Freestanding Gas Ranges specifications

KitchenAid Freestanding Gas Ranges are designed for both amateur home cooks and seasoned culinary enthusiasts, providing a blend of performance, style, and innovative technology. These ranges stand out in the kitchen not just for their functionality, but also for their sleek, professional appearance that can elevate any kitchen decor.

One of the flagship features of KitchenAid Gas Ranges is the Even-Heat True Convection system. This technology utilizes a unique fan and a third heating element to ensure that hot air circulates evenly around the oven, allowing for consistent baking results. Whether you’re roasting meats or baking pastries, this feature guarantees thorough cooking and browning across all racks, significantly enhancing culinary outcomes.

Another notable characteristic is the versatility offered by the various burners. KitchenAid Freestanding Gas Ranges typically include multiple burners with varied BTU outputs, providing options for simmering delicate sauces as well as high-heat cooking for searing and sautéing. The powerful burners are designed to accommodate large pots and pans for family meals or entertaining guests.

The Professional-style design is complemented by features like the premium matte black finish and sturdy grates, which provide a professional-grade cooking surface. Many models come with a large capacity oven, allowing for the cooking of multiple dishes simultaneously. The steam rack, available on certain models, enables more cooking techniques, including steaming vegetables or infusing moisture into baked goods.

Smart capabilities are another important aspect of KitchenAid Gas Ranges. With features like Wi-Fi connectivity, home cooks can control their ovens remotely, preheat the oven from their smartphone, or even receive alerts when their dish is ready. These intelligent technologies not only add convenience but also enable users to multitask effectively.

Safety is paramount in KitchenAid Gas Ranges, which come equipped with features such as a flame failure device that automatically shuts off the gas supply if a burner goes out. The easy-to-clean surfaces and removable grates ensure that upkeep is hassle-free, allowing users to maintain a clean and organized kitchen.

In conclusion, KitchenAid Freestanding Gas Ranges offer a wealth of features that enhance both cooking performance and convenience. With innovative technologies, a professional aesthetic, and a commitment to safety, they provide a comprehensive cooking solution that meets the demands of modern lifestyles. Whether you're preparing a simple weeknight dinner or hosting a festive gathering, KitchenAid delivers the tools and technology needed to inspire culinary creativity.