ELECTRONIC OVEN CONTROL
1 | 2 | 3 | 4 | 5 | 6 | 7 |
UPPER OVEN
CONVERSION
| 8 | 9 |
| 10 |
| 11 | 12 | 13 |
1. | Lower Oven Display |
| 6. | Timer |
| 11. | Convect Full Meal | |
2. | Lower Oven Start and Cancel |
| 7. | Clock |
| 12. | Lower Oven Light | |
3. | Number Pads |
| 8. | Lower Oven Setting Selectors | 13. | Upper Oven Control | ||
4. | Control Lock |
| 9. | EasyConvect™ Conversion |
| (see separate Use and Care Guide) | ||
|
|
| ||||||
5. | Upper Oven Display, Time of Day/ | 10. | Timed Cooking |
|
|
| ||
| Timer Display |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Display(s) |
|
|
|
|
| Start | |
When power is first supplied to the appliance, everything on the display(s) will light up for 5 seconds. Then, “PF id = 27” or “PF id = 30” will appear. Press LOWER OVEN CANCEL to clear display(s).
Any other time “PF id = 27” or “PF id = 30” appears, a power failure occurred. Press LOWER OVEN CANCEL and reset the clock if needed.
Lower Oven Display (combination oven models)
When the lower oven is in use, this display shows the lower oven temperature, heat source(s) and start time.
During lower oven Timed Cooking, this display also shows a vertical bar and minute time countdown and the stop time (if entered).
If “Err” appears on the display, an invalid pad was pressed. Press LOWER OVEN CANCEL and retry your entry.
When the lower oven is not in use, this display is blank.
Upper Oven Display (combination oven models), Display (single oven models)
When the upper oven or single oven is in use, this display shows the upper oven or single oven heat source(s), cooking power, quantities, weights and/or help prompts.
If “RETRY” flashes on the display for one second, an invalid pad was pressed. Retry your entry.
When the upper oven or single oven is not in use, this display shows the time of day or Timer countdown.
The START pad begins any lower oven function except the Timer. If not pressed within 5 seconds after pressing a pad, “START?” will appear on the lower oven display as a reminder. If not pressed within 4 minutes after pressing a pad, the oven display will return to inactive mode (blank) and the programmed function will be canceled.
Lower Oven Cancel
The LOWER OVEN CANCEL pad stops any lower oven function except for the Clock, Timer and Control Lock.
The cooling fan may continue to operate even after LOWER OVEN CANCEL is pressed depending on the oven temperature.
Clock
This is a
To Set:
Before setting, make sure the ovens, Timer and Timed Cooking are off.
1.Touch CLOCK SET • START.
2.Touch the number pads to set the time of day.
3.Touch CLOCK SET • START, START or EASY MINUTE START.
To remove the time of day from the display: Touch and hold CLOCK SET • START for 5 seconds.
To return the time of day to the display: Touch CLOCK SET • START. The time should not have to be reset.
6