Before Calling for Service

If hot water dispenser does not operate, check these points first:

■Has circuit breaker tripped or house fuse blown?

■Is power supply cord plugged into a grounded 3 prong outlet?

■Is the Temperature Control set to the “Off” position?

■Has the water supply been turned off?

■Is the electrical outlet controlled by a switch?

Troubleshooting Guide

If you need more help, check the chart below. This could save you the cost of a service call for a problem that is not covered by the warranty.

PROBLEM

CHECK THE FOLLOWING

PROBLEM

CHECK THE FOLLOWING

Water is not hot.	■ Check that the circuit breaker is not
	tripped or the house fuse blown.
	■ Check that power supply cord is
	plugged into a grounded 3 prong outlet.
	■ Check if the electrical outlet is operated
	by a switch. The switch may have
	turned power off.
	■ Cold water in tank is still being heated.
	Wait 15 minutes and check temperature

Water does not flow from faucet.

■Check that water supply valve is open.

■Check that faucet screen is not clogged. See “Hot water dispenser care.”

■Check for hoses with kinks.

■If a water filter is used, check that water pressure to hot water dispenser is 20 psi (138 kPa) minimum.

	again.
	■ Check that the Temperature Control is
	set to the “Max” setting.

Vapor appears,	■ Adjust Temperature Control to a lower
dispenser makes	setting that eliminates the vapor or
boiling water noises,	noise. If you live at a high altitude, you
or water is too hot.	may need to lower the thermostat
	setting to keep water from boiling.

Water has an	■ Hot water dispenser is attached to hot
unpleasant taste.	water line. Attach to cold water line.
	■ Install a water filtration system on cold
	water line to dispenser.
	■ If the dispenser has not been used for 3
	or more days or if only 1 to 3 cups of
	water are dispensed in a day, the tank
	may need to be purged. Hold the cap
	open for 2 to 3 minutes to purge the old
	water from the tank. Allow new water in
	tank to reach maximum temperature

Hot water drips or sputters from faucet.

■Check that tubing is not bent or kinked.

■Adjust Temperature Control to a lower setting that eliminates the drips or sputters.

■Check that faucet screen is not clogged. See “Hot water dispenser care.”

■Check for proper installation of copper tubing from faucet to storage tank and from faucet to cold water line. See “Installation instructions.”

	(approximately 15 minutes) before
	dispensing water.

Water flows very	■ If a water filtration system is used, check
slowly from faucet,	that the water pressure from the filter
less than 1/2 gallon	system to the hot water dispenser is 20
(1.9 liter) per minute.	psi (138 kPa).

Series KHWG160 specifications

The KitchenAid Series KHWG160 is an impressive addition to the KitchenAid lineup, designed specifically for the modern cooking enthusiast who values both functionality and style. This versatile kitchen appliance is primarily a high-performance hand mixer that caters to a variety of culinary needs.

One of the standout features of the KHWG160 is its powerful 160-watt motor. This robust motor allows users to tackle a wide range of tasks, from whipping cream to mixing dough, with ease. Its variable speed settings—10 in total—enable precise control over mixing speeds, ensuring that users can achieve the perfect consistency for any recipe. The slower first speed is particularly useful for incorporating dry ingredients without creating a mess.

The KHWG160 is equipped with a variety of attachments, making it an essential tool in any kitchen. The included stainless steel beaters are not only durable but also designed for effective mixing. For those looking to fold ingredients gently, the included dough hooks and whisk attachment provide additional versatility, allowing the user to tackle tasks such as kneading bread dough or aerating batter.

In terms of design, the KHWG160 showcases KitchenAid's signature aesthetic, featuring a sleek and elegant profile available in multiple colors. This attention to stylistic detail ensures that the hand mixer is not only a functional tool but also a beautiful addition to your kitchen countertop.

Another notable technology featured in the KHWG160 is the soft-start function. This thoughtful design prevents splattering and ensures that ingredients are blended smoothly from the very start of the mixing process. Users appreciate this feature, as it enhances the overall cooking experience and results in cleaner work surfaces.

The KHWG160 also features a convenient eject button located on the top of the mixer. This allows for easy removal of attachments, streamlining the cleanup process and enhancing user convenience.

Overall, the KitchenAid Series KHWG160 stands out for its combination of power, versatility, and aesthetic appeal. It's an excellent choice for anyone looking to elevate their cooking experience, making it a valuable investment in both everyday cooking and special occasion baking. Whether you're a beginner or a seasoned home chef, this hand mixer is designed to make every culinary task enjoyable and efficient.