KitchenAid 2313715A manual Troubleshooting, Ice Maker Operation, Ice Production

Page 10

8.If the room temperature will drop below 32°F (0°C), remove water from the drain line.

For ice makers with a drain pump installed:

■Plug in ice maker or reconnect power.

■Turn ice maker off and remove all remaining ice from ice bin.

■Pour 1 qt (0.95 L) of water into the ice bin near the drain and let the unit stand for approximately five minutes. This will allow the water in the bin to drain into the drain pump so that the pump will remove the remaining water from the ice bin and the drain pump.

■ Unplug ice maker or disconnect power.

9.Before using again, clean the ice maker and storage bin.

10.Plug into a grounded 3 prong outlet.

NOTE: All components of the ice maker are permanently lubricated at the factory. They should not require any additional oiling throughout the normal life of the machine.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Ice Maker Operation

Your ice maker will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■Is the power cord plugged in? Plug into a grounded 3 prong outlet.

■Is the control set to ON? Be sure that the control is set to ON.

■Has a household fuse blown, or has a circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

■Is the room temperature cooler than normal? Room temperature must be above 55°F (13°C). Otherwise, bin thermostat may sense cold room temperature and shut off even though the bin is not full of ice. Also, unit may not restart once it does shut off.

■Does the red light come on when the Clean button is pushed? The ice maker is receiving power but may need cleaning. See “Cleaning.”

■Does the ice maker have a drain pump? If there was a large amount of water added to the ice maker, wait a few minutes for the drain pump to clear. If there is still water in the bin, check to see whether the drain hose is kinked.

Ice maker seems noisy

■Is water being circulated through the ice maker? This is normal operation. Water is added once per ice-making cycle.

■Is the water in the reservoir overflowing? This is normal. This overflow helps to purge minerals that were removed from the water during the ice making process.

■Is there a “whooshing” sound? Check the following things:

■Make sure that the water supply is hooked up and turned on.

■Make sure that the drain cap is tight and the water drain pan pump is securely attached to the water pan.

■Is there ice between the evaporator plate and the cutting grid? Check to be sure that the ice maker is level. See “Leveling.” If the ice maker is level, and the problem persists, run a cleaning cycle. See “Cleaning.”

Ice Production

Ice maker runs but produces no ice

■Is the control set to ON? Be sure that the control is set to ON.

■Is the water supply connected? Make sure the water supply is properly connected and turned on.

■Is the drain cap securely in place? If the drain cap is loose, water will empty from the water pan, and you will have either thin ice or no ice. Tighten the drain cap.

■Is there debris in the drain tube? Clean the drain tube.

■Is there a kink in the drain line? Be sure that there are no kinks in the line.

■Is the service light flashing on and off continually? Call for service.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Table of Contents/Table des matières ICE MakerICE Maker Safety Table of ContentsLocation Requirements Installation InstructionsUnpack the Ice Maker Electrical RequirementsLeveling Water Supply RequirementsConnect Water Supply Rear View Drain ConnectionGravity Drain System Side ViewNormal Sounds ICE Maker USEHow Your Ice Maker Works Usingthe Controls CleaningICE Maker Care Interior Components CondenserDirty or clogged condenser Vacation and MovingCare To shut down the ice makerIce Maker Operation TroubleshootingIce Production Ice Quality Assistance or ServicePlumbing Problems U.S.ACanada Kitchenaid ICE Maker WarrantyONE Year Limited Warranty Items Kitchenaid will not PAY forDéballage de la machine à glaçons Instructions D’INSTALLATIONSécurité DE LA Machine À Glaçons Enlèvement des matériaux d’emballageSpécificationsélectriques Emplacement d’installationMéthode de mise à la terre recommandée Spécifications de l’alimentation en eauOutillage nécessaire NivellementRaccordement à lacanalisation d’eau Outils requisOuvrir le robinet darrêt Raccordementau conduit dévacuationVidange par gravité VUE ArrièreRaccordement du conduit dévacuation Sons normauxSystème à pompe de vidange sur certains modèles VUE LatéraleUtilisation DE LA Machine À Glaçons Utilisation des commandesHoliday Mode mode vacances Fonctionnement dela machine à glaçonsEntretien DE LA Machine À Glaçons NettoyageComposants intérieurs Déménagement Machine à glaçons avec pompe de drainageLa machine à glaçons ne fonctionne pas DépannageProduction deglaçons La machine à glaçons semble bruyanteQualité des glaçons Assistance OU ServiceProblèmes deplomberie Kitchenaid NE Prendra PAS EN Charge Garantie DE LA Machine À Glaçons KitchenaidGarantie Limitée DE UN AN 2313715A

2313715A specifications

The KitchenAid 2313715A is a versatile and innovative kitchen gadget designed for home cooks who are looking to enhance their culinary experience. This food processor has become a staple in many kitchens due to its powerful performance and user-friendly design.

One of the standout features of the KitchenAid 2313715A is its powerful motor, which allows for efficient and quick processing of ingredients. This motor is designed to handle a variety of tasks, from chopping and slicing to mixing and pureeing. With multiple speed settings, users can easily adjust the power to suit their specific needs, ensuring that food is prepared to perfection.

In addition to its impressive motor, the KitchenAid 2313715A boasts a generous bowl capacity, allowing users to process larger quantities of food at once. This is particularly beneficial when preparing meals for families or gatherings, as it reduces the time spent on food prep. The bowl is also designed with a wide feed chute that accommodates whole fruits and vegetables, minimizing the need for pre-cutting and maximizing efficiency.

The design of the KitchenAid 2313715A is not only functional but also aesthetically pleasing. The sleek and modern appearance makes it an attractive addition to any kitchen countertop. Furthermore, the appliance is equipped with a variety of attachments, including slicing discs, shredding discs, and a metal blade, which provide users with added versatility for multiple culinary tasks.

Additionally, the KitchenAid 2313715A features a safety locking mechanism, ensuring that the processor operates only when securely assembled. This safety feature lends peace of mind, particularly for those who may be new to using kitchen appliances.

Maintenance and cleaning are also a breeze with this food processor. Most components are dishwasher-safe, making it easy to keep the appliance in optimal condition after use.

Overall, the KitchenAid 2313715A food processor stands out for its robust performance, user-friendly design, and aesthetic appeal. It incorporates cutting-edge technology while maintaining the reliability that KitchenAid is known for, making it an essential tool for both aspiring and experienced chefs alike. Whether you’re preparing everyday meals or exploring new recipes, the KitchenAid 2313715A is designed to elevate your cooking experience.
Top Page Image Contents