KitchenAid 2313715A manual ICE Maker Care, Cleaning, Usingthe Controls

Page 7

3.The water containing the rejected minerals is drained after each freezing cycle.

4.Fresh water enters the machine for the next ice making cycle.

5.Cubes fall into the storage bin. When the bin is full, the ice maker shuts off automatically and restarts when more ice is needed. The ice bin is not refrigerated, and some melting will occur. The amount of melting varies with room temperature.

NOTE: As the room and water temperatures vary, so will the amount of ice produced and stored. This means that higher operating temperatures result in reduced ice production.

ICE MAKER CARE

Cleaning

The ice making system and the air cooled condenser need to be cleaned regularly for the ice maker to operate at peak efficiency and to avoid premature failure of system components. See the “Ice Maker System” and the “Condenser” sections.

Exterior Surfaces

Wash the exterior enamel surfaces and gaskets with warm water and mild soap or detergent. Wipe and dry. Regular use of a good household appliance cleaner and wax will help protect the finish. Do not use abrasive cleaners on enamel surfaces as they may scratch the finish.

For products with a stainless steel exterior, use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Do not use chlorine bleach on the stainless steel surfaces.

Usingthe Controls

1.To start the normal ice making cycle, select ON.

2.To stop ice maker operation, select OFF.

NOTE:

Pressing the ON/OFF switch does not shut off power to the ice maker.

Allow 24 hours to produce the first batch of ice. Discard the first batch produced.

Holiday Mode

The Holiday Mode feature is designed for the traveler or for those whose religious observances require turning off the lights and the ice maker. By selecting this feature, ice production will be disabled and the interior lights will turn off.

Press and hold the Holiday Mode button to turn on the Holiday Mode feature. Press and hold the button again to turn off the feature.

Service

The service light indicates when service is needed. If the service light turns on, turn the ice maker off and back on. If the service light turns on again, call for service.

Clean/Reset

The Clean/Reset Mode is designed to run the ice maker through the cleaning cycle. To clean your ice maker, see “Ice Maker System” in the “Cleaning” section. It is recommended that you clean the ice maker at least once per year. In hard water areas this may need to be done more often. If there is a significant drop in ice production your ice maker should be cleaned.

Ice Maker System

Minerals that are removed from water during the freezing cycle will eventually form a hard scaly deposit in the water system. Cleaning the system regularly helps remove the mineral scale buildup. How often you need to clean the system depends upon how hard your water is. With hard water of 15 to 20 grains/gal. (4 to 5 grains/liter), you may need to clean the system as often as every 6 months.

NOTE: Use one 16 oz (473 mL) bottle of approved ice maker cleaner. To order, call 1-800-442-9991and ask for Part Number 8171307. In Canada, call 1-800-807-6777.

1.Push the selector switch to OFF.

2.Wait 5 to 10 minutes for the ice to fall into the storage bin. Remove all ice from the storage bin.

3.Unscrew the drain cap from the bottom of the water pan located inside the storage bin as shown. Allow the water to drain completely.

4.Replace the drain cap securely on the water pan. If the drain cap is loose, water will empty from the water pan and you will have either thin ice or no ice.

5.Read and follow all handling information on the cleaner bottle before completing the steps below. Use one 16 oz (473 mL) bottle of approved ice maker cleaner.

6.Pour one bottle of solution into the water pan. Fill the bottle twice with tap water and pour it into the water pan.

A

B B

C

D

A. Water pan

B. Water pan thumb screws

C. Water pan drain pump

D. Drain cap

7

Image 7
Contents ICE Maker Table of Contents/Table des matièresTable of Contents ICE Maker SafetyElectrical Requirements Installation InstructionsUnpack the Ice Maker Location RequirementsLeveling Water Supply RequirementsConnect Water Supply Side View Drain ConnectionGravity Drain System Rear ViewNormal Sounds ICE Maker USEHow Your Ice Maker Works Usingthe Controls CleaningICE Maker Care Interior Components CondenserDirty or clogged condenser To shut down the ice maker Vacation and MovingCareIce Maker Operation TroubleshootingIce Production U.S.A Assistance or ServicePlumbing Problems Ice QualityItems Kitchenaid will not PAY for Kitchenaid ICE Maker WarrantyONE Year Limited Warranty CanadaEnlèvement des matériaux d’emballage Instructions D’INSTALLATIONSécurité DE LA Machine À Glaçons Déballage de la machine à glaçonsSpécifications de l’alimentation en eau Emplacement d’installationMéthode de mise à la terre recommandée SpécificationsélectriquesOutils requis NivellementRaccordement à lacanalisation d’eau Outillage nécessaireVUE Arrière Raccordementau conduit dévacuationVidange par gravité Ouvrir le robinet darrêtVUE Latérale Sons normauxSystème à pompe de vidange sur certains modèles Raccordement du conduit dévacuationFonctionnement dela machine à glaçons Utilisation des commandesHoliday Mode mode vacances Utilisation DE LA Machine À GlaçonsNettoyage Entretien DE LA Machine À GlaçonsComposants intérieurs Machine à glaçons avec pompe de drainage DéménagementLa machine à glaçons semble bruyante DépannageProduction deglaçons La machine à glaçons ne fonctionne pasQualité des glaçons Assistance OU ServiceProblèmes deplomberie 2313715A Garantie DE LA Machine À Glaçons KitchenaidGarantie Limitée DE UN AN Kitchenaid NE Prendra PAS EN Charge

2313715A specifications

The KitchenAid 2313715A is a versatile and innovative kitchen gadget designed for home cooks who are looking to enhance their culinary experience. This food processor has become a staple in many kitchens due to its powerful performance and user-friendly design.

One of the standout features of the KitchenAid 2313715A is its powerful motor, which allows for efficient and quick processing of ingredients. This motor is designed to handle a variety of tasks, from chopping and slicing to mixing and pureeing. With multiple speed settings, users can easily adjust the power to suit their specific needs, ensuring that food is prepared to perfection.

In addition to its impressive motor, the KitchenAid 2313715A boasts a generous bowl capacity, allowing users to process larger quantities of food at once. This is particularly beneficial when preparing meals for families or gatherings, as it reduces the time spent on food prep. The bowl is also designed with a wide feed chute that accommodates whole fruits and vegetables, minimizing the need for pre-cutting and maximizing efficiency.

The design of the KitchenAid 2313715A is not only functional but also aesthetically pleasing. The sleek and modern appearance makes it an attractive addition to any kitchen countertop. Furthermore, the appliance is equipped with a variety of attachments, including slicing discs, shredding discs, and a metal blade, which provide users with added versatility for multiple culinary tasks.

Additionally, the KitchenAid 2313715A features a safety locking mechanism, ensuring that the processor operates only when securely assembled. This safety feature lends peace of mind, particularly for those who may be new to using kitchen appliances.

Maintenance and cleaning are also a breeze with this food processor. Most components are dishwasher-safe, making it easy to keep the appliance in optimal condition after use.

Overall, the KitchenAid 2313715A food processor stands out for its robust performance, user-friendly design, and aesthetic appeal. It incorporates cutting-edge technology while maintaining the reliability that KitchenAid is known for, making it an essential tool for both aspiring and experienced chefs alike. Whether you’re preparing everyday meals or exploring new recipes, the KitchenAid 2313715A is designed to elevate your cooking experience.