KitchenAid W10137649A installation instructions Temperature and Moisture, Ice and Water

Page 16

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Freezer door closed completely? Firmly close the freezer compartment door. If the freezer compartment door will not close all the way, see “The doors will not close completely.”

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

The water dispenser will not operate properly

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? Straighten the water source line.

■New installation? Flush and fill the water system. See “Water Dispenser.”

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Clean Before UsingUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements Location RequirementsWater Supply Requirements Connect the Water Supply Connect to Water LineConnect to Refrigerator StyleRefrigerator Door and Drawer Reverse Door Panel Series Replace Door and HingesFreezer Drawer Remove Drawer FrontDoor Swing Reversal optional Architect SeriesPanel Series Adjust the Door Factory Trim KitRemove the Door Panel Replace the Door PanelUsing the Controls Refrigerator USEElectronic Controls Digital ControlsCrisper Humidity Control Water Filtration System Ice MakerWater Dispenser Refrigerator Care CleaningChanging the Light Bulb Troubleshooting Refrigerator OperationTemperature and Moisture Ice and WaterWater is leaking from the dispenser system Water Filter CertificationsWater from the dispenser is warm Product Data Sheets Application Guidelines/Water Supply ParametersKitchenaid Refrigerator Warranty ONE Year Limited WarrantyItems Kitchenaid will not PAY for Disclaimer of Implied Warranties Limitation of RemediesInstructions Dutilisation DU Réfrigérateur Sécurité DU RéfrigérateurInstructions D’INSTALLATION Déballage du réfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Enlèvement des matériaux d’emballageExigences demplacement Méthode recommandée de mise à la terreSpécifications électriques Spécifications de l’alimentation en eauRaccordement de la canalisation deau Pression de leauAlimentation en eau par osmose inverse Raccordement à une canalisation d’eauAchever l’installation Plastique Tube de cuivre Orifice darrivée deau Bride en PPorte et tiroir du réfrigérateur Remplacement de la porte et des charnières Retirer et réinstaller le tiroir du congélateurRéinstallation de la façade du tiroir Enlèvement de la façade du tiroirInversion du sens douverture des portes facultatif Série ArchitectSérie avec panneaux décoratifs Garniture de poignéeAjustement de la porte Ensemble décoratif de l’usineStyle 1-Nivellement avant et arrière Style 2- Vis pied de réglage de laplombRéinstallation du panneau de porte Installation des panneaux personnalisés en boisDimensions pour lusinage du panneau de porte Panneaux unis Dimensions pour les panneaux en bois personnalisésUtilisation des commandes Commandes électroniquesCommandes numériques Utilisation DU RéfrigérateurHoliday Mode mode vacances Temp Alarm alarme de dépassement de températurePour ajuster les réglages de température Caractéristique OptimIceRéglage de lhumidité dans le bac à légumes Machine à glaçonsRemplacement du filtre à eau Distributeur d’eauSystème de filtration de leau Distribution d’eauEntretien DU Réfrigérateur Remplacement de l’ampoule d’éclairageNettoyage Dépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauLes portes sont difficiles à ouvrir La température est trop élevéeLes glaçons sont creux ou petits Goût, odeur ou couleur grise des glaçonsLe distributeur deau ne fonctionne pas correctement ’eau coule du système de distributionFeuilles DE Données SUR LE Produit Système de filtration d’eau intérieurGarantie DU Réfrigérateur Kitchenaid Garantie Limitée DE UN ANKitchenaid NE Prendra PAS EN Charge W10137649A SP PN W1013750AW10297791

W10137649A specifications

The KitchenAid W10137649A is a modern and versatile appliance designed to elevate your cooking experience. Known for its reliability and innovative features, this kitchen tool caters to both novice cooks and seasoned chefs.

One of the standout characteristics of the W10137649A is its exceptional build quality. Crafted with durable materials, it ensures longevity and withstands the rigors of daily use. The sleek design complements any kitchen aesthetic, making it both a functional and stylish addition to your culinary space.

The W10137649A is equipped with multiple speed settings, giving you precise control over your mixing, blending, and food preparation tasks. Whether you're whipping cream, kneading dough, or mixing batter, you can easily adjust the speed to suit your needs. This versatility is further enhanced by its powerful motor, which delivers consistent performance across various tasks.

Another key feature of the W10137649A is its user-friendly interface. The intuitive controls allow for effortless operation, making it easy to switch between different functions and speeds. Additionally, the appliance has a spacious bowl capacity, accommodating larger batches of ingredients with ease. This makes it perfect for families or individuals who love hosting gatherings and preparing large meals.

One of the notable technologies integrated into the W10137649A is its planetary mixing action. This unique design allows the mixing attachments to rotate in one direction while the bowl rotates in the opposite direction. As a result, ingredients are blended more thoroughly and evenly, reducing the need for manual scraping and ensuring consistent outcomes.

Moreover, the KitchenAid W10137649A comes with a variety of attachments, including a dough hook, balloon whisk, and flat beater, allowing you to tackle a wide range of culinary tasks. These accessories are easy to switch out and clean, further enhancing usability.

In summary, the KitchenAid W10137649A stands out as a premier choice for anyone looking to invest in a reliable and versatile kitchen appliance. Its combination of high-quality construction, user-friendly design, and innovative technologies make it an essential tool for creating delicious meals and baked goods. With this appliance in your kitchen, you'll be well-equipped to bring your culinary creations to life.
Top Page Image Contents