KitchenAid W10137649A Location Requirements, Electrical Requirements, Water Supply Requirements

Page 3

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for a ¹⁄₂" (1.25 cm) space at the top and behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave 2¹⁄₂" (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install the refrigerator in a location where the temperature will fall below 55°F (13°C).

¹⁄₂" (1.25 cm)

2¹⁄₂" (6.3 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve which reduces water flow and clogs more easily.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

Water Pressure

A cold water supply with water pressure of between 35 and 120 psi (241 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and

827 kPa).

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsClean Before Using Unpack the RefrigeratorLocation Requirements Electrical RequirementsWater Supply Requirements Style Connect the Water SupplyConnect to Water Line Connect to RefrigeratorRefrigerator Door and Drawer Remove Drawer Front Reverse Door Panel SeriesReplace Door and Hinges Freezer DrawerArchitect Series Door Swing Reversal optionalPanel Series Replace the Door Panel Adjust the DoorFactory Trim Kit Remove the Door PanelRefrigerator USE Using the ControlsDigital Controls Electronic ControlsCrisper Humidity Control Ice Maker Water Filtration SystemWater Dispenser Cleaning Refrigerator CareChanging the Light Bulb Refrigerator Operation TroubleshootingIce and Water Temperature and MoistureWater Filter Certifications Water is leaking from the dispenser systemWater from the dispenser is warm Application Guidelines/Water Supply Parameters Product Data SheetsDisclaimer of Implied Warranties Limitation of Remedies Kitchenaid Refrigerator WarrantyONE Year Limited Warranty Items Kitchenaid will not PAY forSécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurEnlèvement des matériaux d’emballage Instructions D’INSTALLATIONDéballage du réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications de l’alimentation en eau Exigences demplacementMéthode recommandée de mise à la terre Spécifications électriquesRaccordement à une canalisation d’eau Raccordement de la canalisation deauPression de leau Alimentation en eau par osmose inversePlastique Tube de cuivre Orifice darrivée deau Bride en P Achever l’installationPorte et tiroir du réfrigérateur Enlèvement de la façade du tiroir Remplacement de la porte et des charnièresRetirer et réinstaller le tiroir du congélateur Réinstallation de la façade du tiroirSérie Architect Inversion du sens douverture des portes facultatifGarniture de poignée Série avec panneaux décoratifsStyle 2- Vis pied de réglage de laplomb Ajustement de la porteEnsemble décoratif de l’usine Style 1-Nivellement avant et arrièreDimensions pour les panneaux en bois personnalisés Réinstallation du panneau de porteInstallation des panneaux personnalisés en bois Dimensions pour lusinage du panneau de porte Panneaux unisUtilisation DU Réfrigérateur Utilisation des commandesCommandes électroniques Commandes numériquesCaractéristique OptimIce Holiday Mode mode vacancesTemp Alarm alarme de dépassement de température Pour ajuster les réglages de températureMachine à glaçons Réglage de lhumidité dans le bac à légumesDistribution d’eau Remplacement du filtre à eauDistributeur d’eau Système de filtration de leauRemplacement de l’ampoule d’éclairage Entretien DU RéfrigérateurNettoyage Fonctionnement du réfrigérateur DépannageLa température est trop élevée Température et humiditéGlaçons et eau Les portes sont difficiles à ouvrir’eau coule du système de distribution Les glaçons sont creux ou petitsGoût, odeur ou couleur grise des glaçons Le distributeur deau ne fonctionne pas correctementSystème de filtration d’eau intérieur Feuilles DE Données SUR LE ProduitW10137649A SP PN W1013750A Garantie DU Réfrigérateur KitchenaidGarantie Limitée DE UN AN Kitchenaid NE Prendra PAS EN ChargeW10297791

W10137649A specifications

The KitchenAid W10137649A is a modern and versatile appliance designed to elevate your cooking experience. Known for its reliability and innovative features, this kitchen tool caters to both novice cooks and seasoned chefs.

One of the standout characteristics of the W10137649A is its exceptional build quality. Crafted with durable materials, it ensures longevity and withstands the rigors of daily use. The sleek design complements any kitchen aesthetic, making it both a functional and stylish addition to your culinary space.

The W10137649A is equipped with multiple speed settings, giving you precise control over your mixing, blending, and food preparation tasks. Whether you're whipping cream, kneading dough, or mixing batter, you can easily adjust the speed to suit your needs. This versatility is further enhanced by its powerful motor, which delivers consistent performance across various tasks.

Another key feature of the W10137649A is its user-friendly interface. The intuitive controls allow for effortless operation, making it easy to switch between different functions and speeds. Additionally, the appliance has a spacious bowl capacity, accommodating larger batches of ingredients with ease. This makes it perfect for families or individuals who love hosting gatherings and preparing large meals.

One of the notable technologies integrated into the W10137649A is its planetary mixing action. This unique design allows the mixing attachments to rotate in one direction while the bowl rotates in the opposite direction. As a result, ingredients are blended more thoroughly and evenly, reducing the need for manual scraping and ensuring consistent outcomes.

Moreover, the KitchenAid W10137649A comes with a variety of attachments, including a dough hook, balloon whisk, and flat beater, allowing you to tackle a wide range of culinary tasks. These accessories are easy to switch out and clean, further enhancing usability.

In summary, the KitchenAid W10137649A stands out as a premier choice for anyone looking to invest in a reliable and versatile kitchen appliance. Its combination of high-quality construction, user-friendly design, and innovative technologies make it an essential tool for creating delicious meals and baked goods. With this appliance in your kitchen, you'll be well-equipped to bring your culinary creations to life.
Top Page Image Contents