General Information, Unpack, Locate Unit

GENERAL INFORMATION

l UNPACK	2 Either a gravity drain system or a sump pump to lift
	Ihe water lo an existing drain.

3 An electrical branch circuit of 115 Volt, 60 Hz, 1 phase, with a 15 Amp delayed action fuse or circuit breaker.

REMOVE

INTERIOR

PACKING

OPEN BOTTOM FLAPS

FIGURE 3

FIGURE 4

lLOCATE UNIT

THIS UNIT MUST BE INSTALLED IN AN

AREA PROTECTED FROM THE ELEMENTS, SUCH AS WIND, RAIN, WATER SPRAY OR DRIP.

I-J

gooFlYlI

( BEST

\ RANGE

7oo F

CR 66A

1 Lay carton on rear face and break open bottom flaps

2 Set carton upright with all four flaps outward. See Figure 3.

3 Lift carton up and off of machine.

4 Remove all tape and packaging material from the outside and inside of the cabinet. See Figure 4.

5R emove the front grill: take out the screws secur- ing the grill at the bottom and Ilft It free of cabinet

6 Turn the fan by hand to make certain It moves freely.

7L oosen thumb screws holding cutter grid and water pan to “thumb tight.”

. UTILITIES

ELECTRICITY DRAIN

OBSERVE LOCAL CODES

Each installation is unique but will require:

1 A cold water inlet of 1/4”OD soft copper tubing and a shut-off valve.

1 Place	unit	so the front	side	WIII	be .completely
unobstructed.		lo provide	proper	air	flow

2 Area should be well ventilated with temperature above 55-F and below 110°F. Best results are obtained between 70°F and 90°F.

3 ProvIsIon for electrlclty, water and drain connec tlons should be determlned

4 The unit may be closed tn on the top and three

sides. but the front MUST BE unobstructed for air

clrculatlon and proper operation Installation should be such that the cabinet can be moved forward for servlclng. If necessary

lLEVEL UNIT

1After placing unit In posItIon. check to make certain the unit IS level side to side and front to back.

2 Accurate leveling IS essential for proper operation.

3 Unit should be shimmed so that it IS solid as well as level. The shims should be of hard permanent type material such as masonite.

4 Compliance with National Sanitation Foundation stan- dards require that this type of product be sealed to the floor at the bottom rail in order to prevent contamination from spills or the entrance of vermin. Therefore, we recommend that when installing this product you seal it to the floor in accordance with those standards. A silicone-type sealer is recommended.

KUIS185S specifications

The KitchenAid KUIS185S is a state-of-the-art undercounter ice maker that promises to streamline your kitchen experience while delivering the convenience of having ice on hand whenever you need it. Its sleek and modern design fits seamlessly into any kitchen decor, making it not only a functional appliance but also a stylish addition to your home.

One of the standout features of the KUIS185S is its impressive ice production capability. With the ability to produce up to 50 pounds of clear, crescent-shaped ice in a 24-hour period, this ice maker ensures that you will never run out of ice during your gatherings or celebrations. The ice storage bin can hold up to 25 pounds of ice, allowing you to have ample supply for any occasion.

The KUIS185S utilizes innovative technology to ensure optimal performance. Equipped with a robust refrigeration system, it maintains a consistent temperature to keep ice from melting too quickly. Its advanced insulation provides excellent thermal retention, further enhancing ice quality and longevity. The unit also features an automatic shut-off function that activates when the bin is full, preventing overfilling and ensuring efficient operation.

Another significant aspect of the KUIS185S is its user-friendly interface. The integrated controls make it simple to adjust settings, and the clear display allows you to monitor the ice-making process easily. The unit is designed with ease of installation in mind, featuring built-in leveling legs and a reversible door for versatile placement options.

In addition to its functional benefits, the KitchenAid KUIS185S is designed with user convenience in mind. The removable ice bin makes it easy to transport ice to your serving area, and the unit's stainless steel exterior is not only durable but also easy to clean, ensuring that maintenance is straightforward.

Overall, the KitchenAid KUIS185S undercounter ice maker is an excellent choice for anyone looking to enhance their kitchen’s functionality. With its high production capacity, innovative technology, and sleek design, it is sure to meet the ice needs of any household or entertaining space, providing an effortless solution for ice production that combines style and practicality.