Open the door and align top edges. Predrill 2 pilot holes using a ³⁄₃₂" drill bit. Use tape to mark the drill bit to gauge hole depth. Drill pilot holes approximately 1¹⁄₂" (3.8 cm) into the top corners of the door using hole in liner as a guide.
Using a Torx® T15® screwdriver, install two #8 x 1³⁄₈" screws in top corners to secure custom wood panel in place.
Remove the short screws (3rd from top) on either side of the inner door panel. Predrill 2 pilot holes using a ³⁄₃₂" drill bit. Use tape to mark the drill bit to gauge the hole depth. Drill pilot holes approximately 1¹⁄₂" (3.8 cm) using the door liner hole as a guide into the panel. Install the 2 remaining long screws.
Choose Attachment Option
WARNING
Excessive Weight Hazard
Use two or more people to move and install dishwasher.
Failure to do so can result in back or other injury.
Use 2 or more people to move and install dishwasher.
IMPORTANT: The dishwasher must be secured to the cabinet. There are two brackets found in the parts bag. Attach the brackets using Option A if the countertop is wood, laminate or another similar surface. If your countertop is marble, granite or another hard surface, install using Option B.
Option A, Countertop attachment:
Remove the brackets from the package and insert into the open slots on the left and
Using a pair of pliers, bend the tab down to secure the bracket in place. Repeat this step for the other side.
NOTE: Do not attach the dishwasher. This will be done later.
17