KitchenAid W10579129B Complete Installation, Option A, Install Access Panel Plastic Panel

Check that top of door does not contact screws, brackets or countertop. If it does, adjust leveling legs.

Open door and check that space between dishwasher cabinet opening and tub is equal on both sides. If spacing is not equal, loosen bracket screws and shift tub. Tighten bracket screws.

If securing with a side attachment, check that sides of door do not rub against the screw heads. If they do, dishwasher must be re-centered. When dishwasher is properly centered, replace plastic buttons.

If needed, see website for animated representation of this step. Visit www.kitchenaid.com/anchoring under FAQ tab.

Complete Installation

Option A, Install Access Panel - Plastic Panel

Place the plastic access panel against the dishwasher leg.

Check that the lower edge of the access panel touches the floor. Adjust if necessary.

Using a flat-blade screwdriver, turn the fasteners ¹⁄₄ turn clockwise to lock into place. The fasteners slot will be straight up and down when properly locked.

24