Cisco Systems 11000 Series manual Powering Up the CSS, Powering Down the CSS, 2-34

Models: 11000 Series

1 122
Download 122 pages 32.92 Kb
Page 82
Image 82
Powering Up the CSS

Chapter 2 Cabling the CSS

Powering Up the CSS

Powering Up the CSS

To power up the AC on a CSS 11050, CSS 11150, or CSS 11800:

1.Attach the power cord to the CSS 11050 or CSS 11150 rear panel AC connector, or to the CSS 11800 AC connector (see the “Connecting Power Cords” section earlier in this chapter).

2.Power on the CSS by toggling the power switch to the 1 (on) position.

For DC power on a CSS 11150 or CSS 11800, set the external disconnect device to the 1 (on) position.

For information concerning the boot process on an 11000 series CSS, refer to the Content Services Switch Administration Guide. For general hardware troubleshooting information, see the following section.

Powering Down the CSS

To shutdown a CSS gracefully and avoid introducing lost or fragmented files, always use the shutdown command prior to removing power from the CSS. This command is available in boot mode.

For example:

(config-boot)# shutdown

Once the CSS shuts down all processes, you may remove power from the CSS.

Troubleshooting CSS Hardware Components

This section provides general troubleshooting information for the CSS components. It includes the following sections:

Troubleshooting the Console Interface

Troubleshooting the CSS Power Supply

Troubleshooting the CSS 11800 Modules

 

Cisco 11000 Series Content Services Switch Hardware Installation Guide

2-34

78-15146-02

Page 82
Image 82
Cisco Systems 11000 Series manual Powering Up the CSS, Powering Down the CSS, Troubleshooting CSS Hardware Components, 2-34