Appendix B Cable Pinouts
RJ-45 RS-232 Serial Connector Pinouts
Table B-4lists the RJ-45 RS-232 Serial connector pinouts for the Diag port.
Table B-4 RJ-45 RS-232 Serial Connector Pinouts for the Diag Port
Signal Name | Pin Number |
| |
Not Used | 1 |
| |
TXD | 2 |
| |
RXD | 3 |
| |
Not Used | 4 |
| |
Not Used | 5 |
| |
Not Used | 6 |
| |
GND | 7 |
| |
Not Used | 8 |
| |
Table B-5lists the RJ-45 RS-232 Serial connector pinouts for the Diag1 and Diag2 ports on the SFM2. These ports provide both console and diagnostic functionality on each of its RJ-45 RS-232 Serial connectors.
Table B-5 RJ-45 RS-232 Serial Connector Pinouts for the SFM2 Diag1 and Diag2 Port
Signal Name | Pin Number |
| |
Not Used | 1 |
| |
TXD - Console | 2 |
| |
RXD - Console | 3 |
| |
GND | 4 |
| |
TXD - Diag | 5 |
| |
RXD - Diag | 6 |
| |
GND | 7 |
| |
Not Used | 8 |
| |
| Cisco 11000 Series Content Services Switch Hardware Installation Guide |
B-4 | 78-15146-02 |
