Cisco Systems 11000 Series Fast Ethernet Module Connectors and LEDs, Parameter Default Setting

Chapter 2 Cabling the CSS

Cabling the CSS 11800 Modules

Configuring a Terminal to the SCM Console Port

This section describes how to configure a terminal connected to the SCM console port. Initially, the terminal settings must match the CSS default settings as specified in Table 2-5.

Table 2-5 CSS Console Port Default Settings

Parameter	Default Setting
Baud Rate	9600
Data Bits	8
Flow Control	none
Parity	none
Stop Bits	1
Terminal Type	VT100/ANSI

Fast Ethernet Module Connectors and LEDs

The FEM is available in two models:

•Model CSS8-IOM-8FE contains eight auto-sensing RJ-45 Fast Ethernet 10/100-Mbps 10BASE-T/100BASE-TX connectors

•Model CSS8-IOM-6/2FE contains six auto-sensing RJ-45 Fast Ethernet 10/100-Mbps 10BASE-T/100BASE-TX connectors and two 100BASE-FX SC fiber connectors

	Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02		2-15