
Chapter 1 Unpacking and Installing the CSS
Unpacking the CSS
Unpacking the CSS 11050 or CSS 11150
To unpack the CSS 11050 or CSS 11150:
1.Remove the CSS and all accessories from the shipping carton.
2.Check the configuration of the CSS and the accessories against the items listed on the packing slip. Report any discrepancies as described in “If the Product is Damaged” in this chapter.
3.To install the CSS 11050 or CSS 11150, go to the “Installing the CSS 11050 or CSS 11150” section.
Unpacking the CSS 11800
The CSS 11800 is shipped attached to a wooden pallet with screws and shipping brackets. Due to the large size and weight of a unit, move it to the installation site before unpacking it from the shipping carton.
To unpack the CSS 11800:
1.Remove all enclosed packing materials. Save the packing materials in case you need to repack the CSS later.
2.Remove the accessories from the shipping carton.
3.Check the configuration of the CSS and the accessories against the packing slip. Report any discrepancies as described in the “If the Product is Damaged” section later in this chapter.
4.Using a Phillips screwdriver, remove the screws from the shipping brackets on the pallet. Figure
5.Carefully remove the CSS from the pallet.
| Cisco 11000 Series Content Services Switch Hardware Installation Guide |