Cisco Systems 11000 Series manual CSS 11050 Front Panel Connectors and LEDs

Chapter 2 Cabling the CSS

Cabling the CSS 11050 and CSS 11150

CSS 11050 Front Panel Connectors and LEDs

All front panels of the CSS 11050 models contain connectors and LEDs that vary according to their model number. For example, the CSS 11051 in Figure 2-3has:

•One RS-232 Console connector (9600 baud)

•One RS-232 Diag connector, reserved for field service use only (115,200 baud)

•Eight auto-sensing 10/100-Mbps Fast Ethernet connectors and associated Link/Activity status, 10/100 (Mbps), and Duplex (Half or Full) LEDs

•Power, Status, and Ready LEDs

Figure 2-3 CSS 11051 Front Panel Connectors and LEDs

2X 4X 6X 8X

Console Diag

RS-2321X 3X 5X 7X

100BASE-TX

1	2 3 4	5	6	7 8	Link/Act
					Duplex
					10/100

Power

Status

Ready

49576

The CSS 11052 (shown in Figure 2-4) also has one Gigabit Ethernet connection using a Gigabit Interface Converter (GBIC), and associated Transmit, Receive, and Link LEDs. The GBIC complies with Revision 5.1 of the GBIC specification for Class 4 GBICs. The GBIC network interface complies with the IEEE 1000BASE-SX specification for short laser wavelength of 850 nm and use SC-type fiber connectors.

Figure 2-4 CSS 11052 Front Panel Connectors and LEDs

Gigabit Ethernet port (left - receive, right - transmit) and LEDs

						100BASE-TX
Console Diag		2X	4X	6X	8X		Link/Act
								Power
						1 2 3 4 5 6 7 8
							Duplex		1000BASE-SX
								Status
							10/100	Ready
	RS-232	1X	3X	5X	7X

Link/Sync Rx

Tx

49577

	Cisco 11000 Series Content Services Switch Hardware Installation Guide
2-4	78-15146-02