Cisco Systems 11000 Series manual 49571

Chapter 1 Unpacking and Installing the CSS

Installing the CSS 11800

To change the location of the mounting brackets on the CSS 11800 chassis from

afront-mount position to an extended-mount position:

1.Remove the seven front mounting bracket screws from one side of the chassis.

2.Align the rear screw holes on the bracket with the screw holes on the front side of the chassis. Note the bracket’s proper orientation as shown in Figure 1-6.

Figure 1-6 Aligning Brackets on the CSS 11800 Chassis for Extended Mounting

Mounting bracket

Mounting bracket

Mounting key

Mounting key

49571

3.Using a Phillips screwdriver, install the seven #10-32 pan-head screws through the extended-mount bracket holes into the CSS.

4.Repeat steps 1 through 3 to install the second bracket onto the other side of the chassis.

	Cisco 11000 Series Content Services Switch Hardware Installation Guide
1-12	78-15146-02