Cisco Systems 11000 Series manual Installing the CSS into the Rack

Models: 11000 Series

1 122
Download 122 pages 32.92 Kb
Page 34
Image 34
Installing the CSS into the Rack

Chapter 1 Unpacking and Installing the CSS

Installing the CSS 11050 or CSS 11150

Figure 1-2 Front-Mounting the Brackets on the CSS 11050 or CSS 11150

Mounting

Mounting

bracket

bracket

49567

Figure 1-3 Mid-Mounting the Brackets on the CSS 11050 and CSS 11150

Mounting

Mounting

bracket

bracket

49568

3.Secure the bracket to the CSS with four screws.

4.Repeat steps 2 and 3 to install a mounting bracket on the other side of the CSS.

You are ready to install the CSS in the cabinet.

Installing the CSS into the Rack

Before you begin, you will need a #2 Phillips screwdriver and four pan-head screws. To install the CSS 11050 or CSS 11150 into an equipment rack:

1.Raise the CSS to the installation height. Align the screw holes on the mounting bracket with the holes on the equipment rack.

 

Cisco 11000 Series Content Services Switch Hardware Installation Guide

1-8

78-15146-02

Page 34
Image 34
Cisco Systems 11000 Series manual Installing the CSS into the Rack