Desa MSRBVN, MSRBVP Pre-Installation Preparation, Location And Space Requirements

Models: MSRBVP MSRBVN

1 32
Download 32 pages 40.7 Kb
Page 4
Image 4
PRE-INSTALLATION PREPARATION

SUN VALLEY STOVE COMPANY

CAST IRON STOVE AND BURNER SYSTEM

PRE-INSTALLATION PREPARATION

oil or kerosene lamps, etc.) in the air exist, may discolor walls. WARNING: A qualified ser- vice person must install stove and burner system. Follow all lo- cal codes.

LOCATION AND SPACE REQUIREMENTS CAUTION: This stove creates warm air currents. These currents move heat to wall surfaces next to stove. Installing stove next to vinyl or cloth wall coverings or operating stove where impurities (such as tobacco smoke, aro- matic candles, cleaning fluids,

Corner Installation

On Wall with Vertical

Termination Through Ceiling

Figure 2 - Common Freestanding Stove Locations

Ceiling

oil or kerosene lamps, etc.) in the air exist, may discolor walls.

LOCATION AND SPACE REQUIREMENTS

Determine the safest and most efficient loca- tion for your Sun Valley B-vent freestanding stove. Make sure that rafters and wall studs are not in the way of the venting system. Choose a location where the heat output is not affected by drafts, air conditioning ducts, windows, or doors. Figure 2 shows some common locations. Read all venting infor- mation in this manual. Be aware of all restric- tions and precautions before deciding the

42"

36"

from

Front

4"

from

Back 21 1/4" Wall

4"

6"

Front

exact location for your stove.

Floor

29"

When deciding the location of your stove, follow these rules:

1.Do not connect this stove and burner system to a chimney flue serving a separate solid-fuel burning fireplace or appliance.

2.Due to high temperatures, do not lo- cate this stove in high traffic areas or near furniture or draperies.

3.Proper clearances must be maintained, see Figures 3 and 4.

4.This stove is a freestanding unit de- signed to set directly on the floor. If your stove is to be installed directly on carpeting, vinyl tile, or any combustible material other than wood, it must be installed on a metal or wood panel ex- tending the full width and depth of the stove. See Figure 5.

Figure 3 - Minimum Clearances for Standard Installation

26"

Front

19 1/2"

4" Manual backgroundManual background 4"

Figure 4 - Minimum Clearance for Corner

Figure 5 - Freestanding Stove with Burner

Installation

System Bottom Dimensions

For more information, visit www.desatech.com

4

106706

Page 4
Image 4
Desa MSRBVN, MSRBVP Pre-Installation Preparation, Location And Space Requirements, Sun Valley Stove Company