Cisco Systems 11000 Series manual Extend-Mounting the CSS 11800 Brackets, Left bracket

Chapter 1 Unpacking and Installing the CSS

Installing the CSS 11800

Extend-Mounting the CSS 11800 Brackets

You can extend-mount a CSS 11800 chassis to set the front edge of the unit behind the front edge of the rack to allow the chassis to be installed in an enclosed rack. Before you can extend-mount a chassis, you need to reposition its mounting brackets. Each bracket has two sets of screw holes. The set of holes you use to install the brackets to the chassis determines how the chassis is mounted in a rack:

•The screw holes toward the front of the bracket position each bracket on the CSS 11800 chassis for front mounting in a cabinet; this is the preinstalled position.

•The screw holes behind the first set of holes position each bracket on the CSS 11800 chassis for extended mounting in a cabinet.

Figure 1-5illustrates extend-mounting the brackets.

Figure 1-5 Screw Holes on the CSS 11800 Bracket for Front and Extended

Mounting

Screw holes for the front-mounting of the 11800 chassis in a cabinet

Front

Screw holes for the extended-mounting of the 11800 chassis in a cabinet

Front

49570

Left bracket Left bracket

	Cisco 11000 Series Content Services Switch Hardware Installation Guide
78-15146-02		1-11