BEFORE STARTING:
Please read these rnstallation instructions COMPLETELY AND CAREFULLY. They will save you time, work, and help to ensure optimum dishwasher performance. OBSERVE ALL LISTED WARNINGS AND CAUTIONS.
For Replacement Installation - Review these complete instructions to be sure that previous connections are compatible.
For New Installations - Plumbrng and electrical connections must be provided before the dishwasher is moved Into place.
These instructions are intended for use by qualified workers who will observe all local codes and ordinances for plumbing connections as well as local codes and/or the Canadian Electrical Code for’electrical connections.
DO NOT REMOVE THE GALVANIZED STEEL SIDE AND BOTTOM PANELS. THE REMOVAL OF THESE ITEMS WILL VOID THE C.S.A. CERTIFICATION AND INCREASE THE DANGER OF FIRE AND
ELECTRICAL SHOCK.
I
YOU WILL NEED THESE TOOLS:
Phillrps Screwdriver Flat Blade Screwdnver
Adjustable Wrenches (2) (if copper fittings are used)
Pipe Wrenches (2) (if galvanized or iron fittings are used) Nut Driver or Socket Set
Wrre Cutters
Tape Measure Spirit/Bubble Lever Electrrc Drrll
1” (25 mm) Drill BII or Hole Saw
58(3 mm) Drill Bit Square
. . . AA/D THESE MATERIALS:
5/a” (16 mm) OD Copper Tubing (of sufficient length for your installation),
l/i” (13 mm) Pipe (of sufficient length for your installation),
%I” (9.5 mm) NPT 90° Street Elbow
90° Compression Elbow: l/z” (13 mm) Tube End & 3/e” (9.5 mm) NPT male pipe end (for copper water supply line only) See Fig. 13 page 10.
l/2” (13 mm) NPT 90° Street Elbow and l/2” (13 mm) NPT female x 3/a” (9.5 mm) NPT male reducing adapter (for galvanized water supply line only)
9/,6” (14 mm) ID Heat and Detergent Resistant Rubber Hose and Clamps or s/a” (16 mm) OD Copper Tubing and Fittings (of sufficient length to accommodate your drain line)
10” (250 mm) Length of 518” (16 mm) OD Soft Copper Tubing, Formed Into a Semicircle (if high loop drain is required - see page 7)
115 Volt, 15 Amp, 2 Wire, Properly Grounded, Branch Circuit x/4” (19 mm) Strain Relief Bushing for Electrical Supply Cable.