To turn on the Lock
Press and hold
for 4 seconds. CONTROL LOCK glows.
If you press any pad while your dishwasher is locked, the light flashes 3 times.
To turn off the Lock
Press and hold ENERGY SAVER™ Dry control for 4 seconds. The light turns off.
Delay Hours
Select this option to run your dishwasher at a later time or during
To delay the start
1.Close the door.
2.Select a wash cycle and options.
Press DELAY HOURS 1 time for a
2 4 8
The number glows above Delay Hours. The dishwasher starts the cycle in the selected number of hours.
3.Press START.
NOTE: To cancel the delay, press DELAY HOURS until no number is lit.
IMPORTANT:
■Operate your dishwasher only when you are at home.
■If your home is equipped with a water softener, do not start the dishwasher during the regeneration of the softener.
Status Indicators
Follow the progress of your dishwasher with the Status indicators.
Water Heating
WATER HEATING glows, and the cycle progression pauses, whenever water is heated during a cycle. Wash or rinse action continues as the water heats.
Clean
CLEAN glows when a cycle is finished. The light turns off when you open and close the door or press Cancel/Drain.
Wash System
The
■The wash water continuously flows through the
■Two water jets, located under the spray arm remove the food particles from the
■A coarse strainer prevents bones, pits, and other large objects from entering the pump system.
NOTE: Periodically check the coarse strainer and remove any objects on the strainer.
Drying System
During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.
IMPORTANT: The vapor is hot. Do not touch the vent during drying.
Overfill Protection Float
The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate.
Check under the float for objects that may keep the protector from moving up or down.
12