Cooktop removal
If removing the cooktop is necessary for cleaning or maintenance:
1.Disconnect electrical supply.
2.Disconnect vent duct system.
3.Lift cooktop out of countertop to complete cleaning or maintenance.
After cleaning and maintenance:
1.Reinstall cooktop in cutout.
2.Check that front edge of cooktop is parallel to front edge of countertop.
3.Connect vent duct system.
4.Connect electrical supply.
If cooktop does not operate:
Check that circuit breaker is not tripped or the house fuse blown.
Check that wire connections are intact.
See Use and Care Guide for troubleshooting list.
If you need assistance:
The KitchenAid Consumer Assistance Center is open 24 hours a day, 7 days a week. Call
When you call, you will need the cooktop model number and serial number. Both numbers can be found on the model/serial rating plate located on the bottom of the cooktop.
If you need service:
Consult your Use & Care Guide.
In the event that your KitchenAid appliance should need service, call the dealer from whom you purchased the appliance or a
Part No. 8285364
© 2002 KitchenAid.
®Registered Trademark/Trademark of KitchenAid U.S.A., KitchenAid Canada licensee in Canada
®
Prepared by KitchenAid, Benton Harbor, Michigan 49022 | Printed in U.S.A. |