Preparing the Food Processor for Use

4.The 2-piece cone offers two sizes; choose the right size for the fruit you are juicing. Use the outer cone for grapefruit, oranges and other large fruits. Remove the outer cone to reveal a smaller inner cone that’s perfect for lemons and limes.

5.Open the lid and place the cone inside the strainer basket over the power shaft. It may be necessary to rotate the cone until it falls into place.

6.Halve the fruit to be juiced.

7.Place fruit half on cone.

8.Close the lid of the strainer basket. Hold the lever arm down firmly with an open palm to maintain even pressure. Operate the citrus press only when the lever arm is in the down position, holding the fruit on the cone.

9.Operate the citrus press by pressing the “I” Button or the “Pulse” Button.

10.When juice is fully extracted, press the

“O” Button.

NOTE: Do not exceed the maximum liquid level line (see page 12) on the work bowl, or juice will leak from the bowl.

11.Unplug the Food Processor.

12.Unlock the strainer basket by turning it clockwise. Remove juiced fruit, cone, and strainer basket from the work bowl.

13.Remove the work bowl from Food Processor and pour juice into desired container.

14.The lever arm can be unclipped from the strainer basket for thorough cleaning. To detach, pull the clip at the bottom of the basket away from the basket side and remove the lever arm from the basket.

15.When reattaching the lever arm to the strainer basket, make sure the tab on the handle snaps securely into the slot on the basket.

English

NOTE: Use of the citrus press without the clip-on lever arm is not recommended. If you do use it without the lever arm, remove the lever arm from the basket (see step 14).