2504.4 en
Connect a VCR or DVD recorder |
| EN |
|
|
|
Warning: do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum distance of 0,5 m from the screen.
CABLE | ANTENNA | EXT2 | EXT1 |
|
|
| |
| o |
|
|
| ANTENNA 75 | EXT2 | EXT1 |
EXT 1/2
| 2 |
1 | 3 |
| |
| RECORDER |
CABLE
ANTENNA
1
o |
|
ANTENNA 75 | EXT2 |
2
With a eurocable
1.Connect the aerial cables 1 and 2 as shown.
2.Connect the eurocable 3 as shown.
3.Make your selection of the source to which the recorder has been connected in the Installation menu, Select your connections, p. 33.
With the aerial cable only
1.Connect the aerial cables 1 and 2 as shown.
2.Tune in your recorder’s testsignal and store the testsignal under programme number 0.
See Analogue: manual installation, p. 30. See also the handbook of your recorder.
RECORDER
4
RECORDERDECODER
Connect a decoder and a VCR
Connect a eurocable 4 to your decoder and to the special euroconnector of your recorder. See also the handbook of your recorder.
Tip: you can also connect your decoder directly to EXT1 or EXT2 with a eurocable.
49