2504.4 en
EN |
| Annex 1 (Continued) |
|
|
|
Local software upgrade procedure
TV menu |
|
Installation | Software upgrade |
............. | Current softw. info |
Channels | Local upgrades |
Manual network i.. Announcement | |
Preferences |
|
Connections |
|
Decoder |
|
Factory settings |
|
Software upgrade |
|
Info |
|
New software, or the currently installed software version, can also be obtained from the www.philips.com/support website.
1.Go to www.philips.com/support using the web browser of your PC.
2.Follow the procedure to find the information and the software related to your TV.
3.Select the latest software upgrade file and download it to you PC.
4.Decompress the
Rename the resulting file “autorun.upg” to for ex. “upgrade.upg”.
Move the renamed file to the subdirectory “Upgrades”.
Remark: if there is no subdirectory “Upgrades” present, please create one.
5.Insert the portable memory that contains the downloaded software upgrade.
6.Select Software Upgrade in the Installation menu. Go to Local upgrades.
The TV will list all compatible software available on the USB portable memory and display the data for each selected upgrade version.
7.Select the correct upgrade version and press the red colour key to start the upgrade.
Your TV will restart and will automatically go to the upgrade mode. After a few seconds it will display the status of the upgrade procedure.
Warning: if you try to upgrade to a software version equal or lower than the current version, a confirmation will be asked. Downgrading to older software should only be done in case of real necessity.
8.When the software upgrade was successful, remove the USB
portable memory and restart your TV with the power switch B at the side of the TV.Your TV will start up with the new software.
Note: Only use software upgrades that can be found on the www.philips.com/support website.
62