Siemens HD2528U, HD2525U Setting the Probe, Changing the Oven Temperature, When Using the Probe

Page 26

Operation - Oven

 

 

Setting the Probe

1.

Prepare meat and place in roasting pan (or on rack in roasting pan as recipe

 

 

specifies). Insert the probe into the meat. See “Inserting the Probe” on

 

 

page 30 for detailed instructions. Make sure the probe is not touching gris-

 

 

tle, fat, bone, the roast rack or the pan.

 

 

Note:

 

 

Do not connect to probe receptacle until probe tip is properly inserted

 

 

into meat.

 

2.

Place roasting pan with meat in cold oven on recommended oven rack. Plug

 

 

probe into the probe receptacle. The probe symbol will appear in display.

 

 

Note:

 

 

The probe temperature can only be set when the probe is installed in

 

 

the oven.

 

3.

Press COOKING MODE and select BAKE, CONVECTION BAKE or CON-

 

 

VECTION ROAST.

 

4.

Press START. The default oven temperature will appear.

 

5.

Turn knob to change oven temperature if necessary.

 

6.

Touch START.

 

7.

Turn knob to set the probe temperature (desired end temperature of the

 

 

food).

 

8.

Press START.

 

The chosen oven temperature is displayed in the upper right hand corner of the

 

display.

 

The probe temperature is displayed in the center to the left of the cooking mode.

 

It starts at 80 degrees and increases in 5°F increments until the chosen probe

 

temperature is reached.

 

The oven is preheated when the beep signals once.

 

When the set probe temperature is reached, END appears in display and oven

 

turns off.

Changing the Oven Temperature

1. Touch TEMPERATURE. Oven temp will flash in the display.

When Using the Probe

2.

Turn the knob to desired temperature and press START twice.

Changing the Probe Temperature

1. Touch TEMPERATURE. The oven temperature will flash.

 

2.

Press START and PROBE TEMP will flash.

 

3.

Turn the knob to desired temperature and press START again.

Note:

Always remove probe from oven when cooking is complete. The probe symbol will remain in the display until the probe is removed. Do not leave probe attachment in oven during self-clean. Oven will not self-clean with the probe installed in the oven

English 24

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Siemens Dual-Fuel Range With threeD Surround Convection Table of Contents About This Manual How This Manual Is OrganizedImportant Safety Instructions SafetyImportant Safety Instructions Fire SafetyTo Reduce the Risk of a Range TOP Grease Fire Authorized service agency or the gas supplier Gas SafetyDo not touch any electrical switch Do not try to light any applianceChild Safety Cleaning SafetyCookware Safety Proper Installation and MaintenanceFood Safety Sealed Gas Burners Parts and AccessoriesGetting Started Burner CapsElectronic Ignitor High Power BurnerBurner Grates Precision BurnerRemoving and Replacing Inserting Racks Into OvenRemoving Flat Racks From Oven Cleaning Disassembly for cleaningReassembly Closed Position Back of Rack Stop Ball Front of RackOven Vent Self CleaningOven Bottom Combustion Vents Slide-in models only Automatic ShutoffIndicators and Other Features Convection FanControl Panel Oven Control PanelClock Select Functions MenuChange the Temperature Scale Turn Clock Display on or OFFSetting the Sabbath Feature for the Oven Only Reset the Factory Set- tings Set the Sabbath FeatureAbout the Sabbath Feature Before Using the Appliance for the First Time Setting the Sabbath Feature for the Warming Drawer OnlyAbout the Cooktop Setting the Burner Heat LevelOperation Cooktop OperationPage Automatic Convection Conversion models with convection bake Setting the Cooking Mode and TemperatureOperation Oven Using the Timer Using Timed or Delayed CookSetting the Sabbath Feature Using the Probe some modelsDelaying the Start of a Timed Mode When Using the Probe Setting the ProbeChanging the Oven Temperature Changing the Probe TemperatureWarming Drawer Specifi- cations Operation Warming Drawer some modelsAbout the Warming Drawer Turning Off the Warming Drawer PreheatingTurning on the Warming Drawer Crisping Stale Items Warming Empty Serving Bowls and PlatesCooktop Cooking Guide Getting the Most Out of Your ApplianceGetting the Most Out of Your Cooktop Cookware Selection GuideGetting the Most Out of Your Oven Oven Cooking GuideProbe some models Baking PansPreheating the Oven Inserting the ProbeOven Cooking Modes Bake, Proof and Warm Convection BakeFor Best Results BroilConvection Broil some models For Best Results Dehydrate Getting the Most Out Your Warming Drawer General TipsFood Temperature Covered Uncovered Daily Cleaning Cleaning and MaintenanceCleaning Cooktop Cleaning GuidelinesControl Knobs / Plastic Exterior Finish / StainlessPart Recommendations Cleaning OvenCleaning the Control Knobs Self Cleaning the Oven Preparing the Oven for Self CleanSelf Clean Cooktop Maintenance Cleaning Warming DrawersMaintenance Oven MaintenanceReplacing the Oven Door Replacing an Oven LightTroubleshooting Charts ServiceBefore Calling Service Cooktop Problem Possible Causes and Suggested SolutionsOven Problem Possible Causes Suggested Solutions OvenStandard Limited Warranty How to Obtain Service or PartsStatement of Limited Warranty Product Data PlateService
Related manuals
Manual 32 pages 4.21 Kb

HD2528U, HD2525U specifications

Siemens has established itself as a leader in the home appliances sector, and among its latest offerings are the HD2528U and HD2525U models. These innovative devices are designed to enhance food preparation experiences in modern kitchens, focusing on efficiency, versatility, and user-friendly technology.

The Siemens HD2528U features a powerful motor with a robust 1500-watt output, providing users with the ability to handle even the toughest ingredients with ease. It is equipped with various speed settings, allowing for precision control over blending and mixing processes. This model also includes a turbo function, which delivers an extra burst of power for quick blending tasks, ensuring seamless transitions from chopping to pureeing.

On the other hand, the HD2525U model is slightly more compact but does not compromise on performance. It offers a 1200-watt motor that efficiently caters to everyday kitchen tasks. With a focus on functionality, it also boasts multiple speed settings, which are perfect for adapting to different food types and preparing a variety of dishes. Both models include a pulse function, providing additional control and ensuring that ingredients can be blended to the preferred consistency.

One of the standout features of the Siemens HD2528U and HD2525U is their advanced technology. The devices are engineered with high-quality stainless steel blades that are not only durable but are also designed to achieve optimal blending results. The ergonomic design ensures comfortable handling, reducing strain during extended use. Additionally, the safety features in both models include a safety lock mechanism that prevents operation when the lid is not properly secured.

Another important aspect of these appliances is their ease of cleaning. The removable and dishwasher-safe parts make maintenance straightforward, catering to the fast-paced lifestyle of modern users. This thoughtfulness in design extends beyond functionality; both models exhibit an elegant, contemporary aesthetic that seamlessly integrates into any kitchen decor.

In summary, the Siemens HD2528U and HD2525U stand out in the crowded market of kitchen appliances due to their powerful motors, multiple speed settings, ergonomic design, and user-centric safety features. With a focus on both performance and convenience, these blenders are perfect for anyone looking to elevate their culinary skills and streamline their food preparation processes. Whether you’re an avid home cook or just looking to simplify daily meal prep, Siemens’ latest offerings promise to deliver the quality and efficiency expected from this renowned brand.
Top Page Image Contents