Krups XP 1500 manual Preparing Coffee, Automatic stop, Putting in the ground coffee

You can either choose to set automatic start time immediately by repeating above - operations, or choose to do the setting later by pushing the clock mode button (C1) twice.

To activate the automatic coffee start at preset time, simply activate the automatic mode button (C2). To shut off appliance that started in automatic mode, press the button (C2).

Coffee Strength

Your XP1530 KRUPS appliance is equipped with Coffee strength mode button.

You can choose to brew an extra strong cup of coffee by activating the strong coffee mode (C3). A coffee cup icon is displayed on top left of the display (10).

To come back to regular coffee just press again the strong coffee mode button (C3).

This is normally used only with a small quantity of water (max 4 cups).

Automatic stop

Your XP1530 KRUPS appliance is equipped with automatic shut off.

2 hours after switching ON drip coffee function, the appliance will switch OFF automatically. In that case you need to turn the selector knob (S) in OFF middle position before making a new coffee cycle.

You can also turn the selector off as soon as the coffee is ready.

Preparing Coffee

We recommend rinsing the coffee machine by running one or two cycles with water only, without ground coffee in the filter basket.

Be sure that the water chamber is empty. Remove any literature, etc if found in the water chamber.

The lid of the glass carafe must be properly positioned during the brewing process.

To open the lid press the flap on top of handle.

Make sure that the swivel filter is closed properly during the brewing process. Push in firmly until the handle touches the side of the coffee maker and filter «clicks» into place.

Caution : If the swivel filter is not

closed in properly the «Pause and

Serve» can not function. This may cause

hot water or hot coffee to overflow.

The «Pause and Serve» mechanism is opened as long as the glass carafe is inserted into the machine and sits properly on the warming plate and the swivel filter is closed properly. When brewing coffee make sure the glass carafe is in place (see «Pause and Serve» section).

Place your appliance near an electrical outlet and release enough cord so that you can plug in the machine (2).

Putting in the ground coffee

1.Swing out the filter holder (3) and insert a paper filter in the filter basket. We recommend using KRUPS size 4. When inserting a paper filter make sure the seam is pointing toward the base of the filter holder

(4).

Use your hands to conform the filter to the contours of the filter basket. This will enable you to achieve better results.

2.Put ground coffee into the filter basket (5). We suggest using one level KRUPS measuring spoon of ground coffee for each cup of robust brewed coffee. You can adjust the quantity to suit your own taste.

We do not recommend using coffee that is ground to a powder-like consistency, as this will prevent water from passing through the filter.

3.Close the filter and make sure that it is completely closed (6).

ATTENTION :

Make sure that the filter paper does not fold over when closing the swivel filter, otherwise the water might run between the filter paper and the filter holder producing a very weak cup of coffee.

Filling the Water Chamber

1.Open the hinged lid (7). Pour in the desired quantity of water (8) and close the lid. The amount of freshly brewed coffee delivered after the brewing process will always be slightly less than the amount put into the water chamber. This is due to the minimal absorption of the water by the ground coffee. The water levels on drip carafe and appliance do take this absorption in account for more convenience.

11

XP1500/1530 US/F/E.PM6.5 11

16/03/05, 10:52