Hotpoint DWF61, DWF60 installation instructions With the dishes, cutlery, etc

Page 24

...With the dishes, cutlery, etc.

Remnants of food are stuck to the dishes, cutlery, etc.

-Dishwasher was not loaded properly. Jets of water could not reach all parts of the dishes etc.

-Too many items in the rack.

-Items in the rack were touching each other.

-Not enough detergent was added to the dispenser.

-Selected wash programme was not intensive enough.

-Rotation of spray arm was obstructed by dish, etc.

-Nozzles in spray arm are blocked by remnants of food.

-Filters are blocked.

-Filters have been incorrectly fitted.

-Waste-water pump is jammed.

Plastic items are discoloured

-Not enough detergent was added to dispenser.

-Detergent has insufficient bleaching properties, use a detergent containing a chemical bleaching agent.

White stains are left on crockery, glasses have a milky appearance.

-Not enough detergent was added to input compartment.

-Amount of rinse-aid was set too low.

-Although water is quite hard, no salt has been put in appliance.

-Water softener was set too low.

-Lid on salt container is not screwed tight.

-If you used a phosphate-free detergent, try a detergent containing phosphates and compare results.

Dishes, cutlery etc. have not been dried.

-Selected programme did not include drying function.

-Amount of rinse-aid was set too low.

-Items were removed from dishwasher too soon.

Glasses have a dull appearance.

-Amount of rinse-aid was set too low.

Tea stains or traces of lipstick have not been completely removed.

-Detergent does not have enough bleaching effect.

-Washing temperature was set too low.

Traces of rust on cutlery.

-Cutlery is not sufficiently rust proof.

-Salt content in washing water is too high.

-Lid on salt container is not screwed on tight.

-Too much salt spilt whilst filling the container.

Glasses become clouded and discoloured; coating cannot be wiped off.

-Unsuitable detergent was used.

-Glasses are not dishwasher proof.

Smears left behind on glasses and cutlery; glasses have acquired a metallic appearance.

-Amount of rinse-aid set too high.

24

Image 24
Contents Hotpoint Contents Electrical Supply FusesInstallation Adjust the FeetChoose a Location Connect to a Drainage System StandpipeChecklist Connect to the Water SupplyGetting to Know your Appliance InteriorGetting to Know your Appliance Before Using your Appliance Adjusting the Water SoftenerDisplay readout example Filling the Special Salt Container How the salt worksLow Rinse Aid Indicator Filling the Rinse AID ContainerPage Detergent compartment with level indicators Adding detergentWashing contents of Upper Basket only Model DWF61 Washing contents of Lower Basket only Model DWF61What can I Wash Items not suitable for the dishwasherProgramme Overview... DWF61 Normal Eco Delicate Quick Pre-rinse50˚ 40˚ 35˚ Programme Overview... DWF60 Type of food remains Amount of food remainsLoading your Dishwasher Loading the dishwasherSpecial cutlery basket, with coverDWF61 only ShelfPots and Pans Washing Dishes Programming the timer Time-remaining indicatorCancel Programme Reset Intensive drying functionCare and Maintenance Overall condition of applianceDishwasher salt Rinse-aidProtection from freezing temperatures Disconnecting the DishwasherSpray arms Transporting the DishwasherTroubleshooting Resolving minor problems yourselfProblems When the appliance is switched on With the appliance itselfWith the dishes, cutlery, etc Important Information DWF61 onlyFig C Fig a Fig D Fig B Hotpoint After Sales Service Repair ServiceHotpoint Guarantee Guarantee Terms & ConditionsKey Contacts