Technical Characteristics

Electrical connection

THE APPLIANCE MUST BE EARTHED

Install a standardised plug corresponding to the load indicated on the appliance data plate (see Technical data table). The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of 3

mminstalled between the appliance and the mains. The switch must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the switch). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point.

Before connecting the appliance to the power supply, make sure that:

• The appliance is earthed and the plug is compliant with the law.

• The socket can withstand the maximum power of the appliance, which is indicated by the data plate.

• The voltage is in the range between the values indicated on the data plate.

• The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only.

!The manufacturer declines any liability should these safety measures not be observed.

IF THE FITTED PLUG IS REMOVED

The flexible mains lead must be correctly connected as below to a three pin plug of not less than 13 amp capacity. If a B.S. 1363 fused plug is used, it must be fitted with a fuse which is approved to B.S. 1362.

Important: the wires in the mains lead are coloured in accordance with the following code:

Connect the Green & Yellow wire to terminal marked “E”

or or coloured Green or Green & Yellow.GB Connect the Brown wire to the terminal marked “L” or coloured Red.

Connect the Blue wire to the terminal marked “N” or coloured Black.

FAILURE TO OBSERVE THE ACCIDENT-PREVENTION REGULATIONS RELIEVES THE MANUFACTURER OF ALL LIABILITY.

IF A MOULDED PLUG IS FITTED

In the event of replacing a fuse in the plug supplied an ASTA approved fuse to BS1362 must be fitted.

NOTE: The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted. A new fuse cover can be obtained from your local Electricity Board.

The colour of the correct replacement fuse cover is that of the coloured marks or inserts in the base of the plug.

Make sure that the cable does not become trapped when pushing the cooker into position.

Replacing the cable

Use a rubber cable of the type H05VV-F with a cross section of 3 x 1.5 mm². The yellow-green earth wire must be 2 ÷ 3 cm longer than the other wires.

Green & Yellow	- Earth
Blue	- Neutral
Brown	- Live

The power supply cable must be type H05VV-F

Green & Yellow to Earth

Brown to Live

Blue to	3 Amp
Neutral	Fuse

Cord

Clamp

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

Grill	Usable Volume: 19 Litres

heating mode: Conventional

Main Oven

Usable Volume: 41 Litres

heating mode: Conventional

Voltage and Frequency

220-240V~ 50/60Hz

HAGL 51 K, HAGL 51 P, 50cm Gas Cooker specifications

The Hotpoint HAGL 51 P and HAGL 51 K models are versatile 50cm gas cookers designed to enhance your kitchen experience while providing exceptional cooking performance. These cookers blend functionality, style, and efficiency, making them ideal for both novice cooks and seasoned chefs.

One of the standout features of the Hotpoint HAGL 51 series is its compact design, which makes it perfect for smaller kitchens without compromising cooking capacity. With four gas burners, including a powerful wok burner, users can enjoy precise heat control and flexibility. The burners are designed to accommodate various cooking styles, from simmering sauces to rapidly boiling water.

Both models are equipped with a fan-assisted gas oven, ensuring even cooking results throughout the cavity. The eye-level grill function adds versatility, allowing users to grill up delicious meals without needing a separate appliance. This feature is particularly handy for those who enjoy preparing crispy dishes or melting cheese to perfection.

Safety is a priority with the Hotpoint HAGL 51 series, featuring flame failure devices that automatically cut off the gas supply if a flame goes out. This provides peace of mind, especially in households with children. Furthermore, the easy-clean oven lining makes maintaining hygiene simple, allowing food residue to be wiped away with minimal effort.

Cooking efficiency is enhanced through the inclusion of a double-glazed oven door, which helps retain heat while keeping the exterior cool to the touch. This not only enhances energy efficiency but also ensures that your kitchen remains comfortable during cooking sessions.

In terms of aesthetics, the HAGL 51 P presents a clean white finish, while the HAGL 51 K offers a sleek black look, allowing users to choose a design that complements their kitchen decor. Both cookers feature ergonomic controls, easy to read markings, and smooth operation for a user-friendly experience.

In summary, the Hotpoint HAGL 51 P and HAGL 51 K gas cookers deliver a balanced blend of style, technology, and practicality. With their compact design, versatile burners, fan-assisted oven, safety features, and easy maintenance, these models prove to be an excellent choice for any kitchen setting. Whether you’re baking, boiling, or grilling, these cookers stand ready to support your culinary creations efficiently and safely.